Engine Oil Pan - Install
安装步骤
Show/hide table
注意 |
---|
在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
- 将密封垫安装在发动机机油底壳 (3) 上。
Show/hide table
图 1 | g01942888 |
- 将发动机油底壳 (3) 安放到位并安装螺栓 (4) 。 拧紧螺栓 (4) 至扭矩为 60 ± 10 N·m (44 ± 7 lb ft)。
- 将密封垫、油尺 (1) 和螺栓 (2) 安装在发动机油底壳 (3) 上。
- 向发动机加注发动机机油到正确的油位。 请参阅操作和保养手册, "发动机机油和滤清器 - 更换"。
Caterpillar Information System:
G3304B and G3306B Engines Engine Oil Pan - Remove
G3304B and G3306B Engines Engine Monitoring System
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes System Pressure - Release
G3304B and G3306B Engines Engine Oil Filter Base - Install
G3304B and G3306B Engines Engine Oil Filter Base - Assemble
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0826 - FMI 04
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0826 - FMI 03
2009/10/01 A New Gasket and Hardware Are Used for the Water Lines In Some 3500 and G3500 Engines {1052, 1380}
G3304B and G3306B Engines Engine Oil Filter Base - Disassemble
C15 and C18 Tier 4 Final Engines Lubrication System
C9.3 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
G3304B and G3306B Engines Engine Oil Filter Base - Remove
G3304B and G3306B Engines Boost Control Valve - Remove
C7.1 Industrial Engine and Generator Set Flash Programming
G3304B and G3306B Engines Engine Cranks but Does Not Start
G3304B and G3306B Engines Boost Control Valve - Disassemble
G3304B and G3306B Engines Boost Control Valve - Assemble
C15 and C18 Tier 4 Final Engines Basic Engine
G3304B and G3306B Engines Boost Control Valve - Install
G3304B and G3306B Engines Engine Does Not Crank
C15 and C18 Tier 4 Final Engines Cooling System
G3304B and G3306B Engines Engine Misfires, Runs Rough or Is Unstable
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0177 - FMI 03
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0177 - FMI 04