Engine Oil Filter Base - Disassemble
拆卸步骤
开始:
- 拆下发动机机油滤清器底座。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 如有必要，将螺塞从发动机机油滤清器底座 (1) 上拆下。
Show/hide table
 | |
| 图 1 | g01942273 |
Show/hide table
 |
弹簧加压的零件和/或盖板可能导致人身伤害。 拆卸盖板时弹簧力将被释放。 松动螺栓时做好准备把持住弹簧加载的盖板。 |
- 拆下螺栓 (4) 、垫圈、盖 (6) 和密封垫 (3) 。
- 将弹簧 (5) 和柱塞 (2) 从发动机机油滤清器底座 (1) 上拆下。
- 如有必要，将防尘盖和取样阀从盖 (6) 上拆下。
Caterpillar Information System:
C15 and C18 Tier 4 Final Engines Lubrication System
C9.3 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
G3304B and G3306B Engines Engine Oil Filter Base - Remove
G3304B and G3306B Engines Engine Oil Cooler - Install
G3304B and G3306B Engines Engine Oil Cooler - Assemble
G3304B and G3306B Engines Engine Oil Cooler - Disassemble
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0702 - FMI 08
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0702 - FMI 04
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0702 - FMI 03
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0702 - FMI 02
2009/06/01 A New Software Is Available for Some On-Highway Engines {1901, 1902, 1920}
G3304B and G3306B Engines Engine Oil Cooler - Remove
2009/10/01 A New Gasket and Hardware Are Used for the Water Lines In Some 3500 and G3500 Engines {1052, 1380}
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0826 - FMI 03
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0826 - FMI 04
G3304B and G3306B Engines Engine Oil Filter Base - Assemble
G3304B and G3306B Engines Engine Oil Filter Base - Install
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes System Pressure - Release
G3304B and G3306B Engines Engine Monitoring System
G3304B and G3306B Engines Engine Oil Pan - Remove
G3304B and G3306B Engines Engine Oil Pan - Install
G3304B and G3306B Engines Boost Control Valve - Remove
C7.1 Industrial Engine and Generator Set Flash Programming
G3304B and G3306B Engines Engine Cranks but Does Not Start