A New Software Is Available for Some On-Highway Engines {1901, 1902, 1920}
- Engine:
- C13 (S/N: KCB1-UP)
The new software improves the diagnostics. The new software makes the diagnostics consistent with fault codes and documents for testing and adjusting. Refer to Table 1 for a list of engine ratings and the corresponding software part numbers.
Show/hide table
| Engine Rating | New Part Number | Old Part Number |
| 335/1550/2100 335/1550/2300 (IC 75) |
346-8821 | 341-1475 |
| 410/1450/2100 410/1450/2300 (IC 72) |
346-8822 | 341-1479 |
| 410/1450/2100 MT - Generic (Rerate) 410/1550/2100 410/1450/2300 (IC 98) |
346-8823 | 341-1481 |
| 410/1450/2100 MT - OWS 410/1450/2300 410/1550/2100 (IC 84) |
346-8824 | 341-1483 |
| 410/1450/2100 GFRSS 410/1650/2300 (IC 81) |
346-8825 | 341-1480 |
| 410/1450/2100 MT - Generic 410/1450/2100 410/1650/2100 (IC 82) |
346-8826 | 341-1482 |
| 410/1550/2100 410/1550/2300 (IC 77) |
346-8827 | 341-1484 |
| 410/1550/21000 AISO 410/1550/2300 (IC 78) |
346-8828 | 341-1485 |
| 430/1550/2100 430/1550/2300 (IC 79) |
346-8829 | 341-1486 |
| 430/1550/2100 AISO 430/1550/2300 (IC 89) |
346-8830 | 341-1487 |
| 430/1550/2100 GFRSS 430/1750/2300 (IC 74) |
346-8831 | 341-1488 |
| 430/1550/2100 Mt - Generic 430/1750/2100 430/1750/2300 (IC 83) |
346-8832 | 341-1489 |
| 430/1650/2100 430/1650/2300 (IC 73) |
346-8833 | 341-1490 |
| 430/1650/2100 AISO 430/1650/2300 (IC 80) |
346-8834 | 341-1491 |
| 470/1550/2100 470/1550/2300 (IC 91) |
346-8835 | 341-1492 |
| 470/1550/2100 MT - Generic 470/1650/2100 470/1650/2300 (IC 99) |
346-8836 | 341-1493 |
| 470/1650/2100 470/1650/23000 (IC 94) |
346-8837 | 341-1494 |
Caterpillar Information System:
G3304B and G3306B Engines Engine Oil Cooler - Remove
2009/07/06 A New Liquid Detector Group Is Used for the Continuous Prelubrication System in 3600 and C280 Engines {1326, 1334, 1350}
Installation and Initial Start-Up Procedure for G3500B and G3500J Engines {1000} Installation and Initial Start-Up Procedure for G3500B and G3500J Engines {1000}
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0673 - FMI 08
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0673 - FMI 02
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0585 - FMI 08
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0585 - FMI 02
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
2009/08/24 An Improved Camshaft Is Used for G3520C Generator Sets that Are Rated at 1800 rpm {1210}
C7.1 Industrial Engine Electronic Control Wiring Group - Aftertreatment Regeneration Device
3508C, 3512C, and 3516C Locomotive Engines Sensor Supply - Test
C15 and C18 Tier 4 Final Engines General Information
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0702 - FMI 02
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0702 - FMI 03
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0702 - FMI 04
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0702 - FMI 08
G3304B and G3306B Engines Engine Oil Cooler - Disassemble
G3304B and G3306B Engines Engine Oil Cooler - Assemble
G3304B and G3306B Engines Engine Oil Cooler - Install
G3304B and G3306B Engines Engine Oil Filter Base - Remove
C9.3 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
C15 and C18 Tier 4 Final Engines Lubrication System
G3304B and G3306B Engines Engine Oil Filter Base - Disassemble
2009/10/01 A New Gasket and Hardware Are Used for the Water Lines In Some 3500 and G3500 Engines {1052, 1380}