Engine Oil Filter Base - Install
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 185-3630     | 皮带扳手组件     | 1     |
- 确保已将 O 形密封圈在发动机机油滤清器底座 (9) 上放置到位。
Show/hide table
图 1 | g01942039 |
- 将 O 形密封圈、发动机机油滤清器底座 (9) 和螺栓 (8) 安装在发动机机油冷却器上。
- 将 O 形密封圈安装在进口管组件 (7) 上。 将一薄层清洁的发动机机油涂抹在进口管组件 (7) 的 O 形密封圈上。
Show/hide table
图 2 | g01942037 |
- 安装密封垫、进口管组件 (7) 和螺栓 (6) 。
- 将 O 形密封圈安装在出口管组件 (2) 上。 将一薄层发动机机油涂抹在出口管组件 (2) 的 O 形密封圈上。
- 安装密封垫、出口管组件 (2) 和螺栓 (3) 。
- 安装卡箍 (5) 和螺栓 (4) 。
- 将一薄层发动机机油涂抹在发动机机油滤清器 (1) 的密封上。
Show/hide table
图 3 | g01942036 |
- 使用工具 (A) 安装发动机机油滤清器 (1) 。
Caterpillar Information System:
G3304B and G3306B Engines Engine Oil Filter Base - Assemble
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0826 - FMI 04
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0826 - FMI 03
2009/10/01 A New Gasket and Hardware Are Used for the Water Lines In Some 3500 and G3500 Engines {1052, 1380}
G3304B and G3306B Engines Engine Oil Filter Base - Disassemble
C15 and C18 Tier 4 Final Engines Lubrication System
C9.3 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
G3304B and G3306B Engines Engine Oil Filter Base - Remove
G3304B and G3306B Engines Engine Oil Cooler - Install
G3304B and G3306B Engines Engine Oil Cooler - Assemble
G3304B and G3306B Engines Engine Oil Cooler - Disassemble
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0702 - FMI 08
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes System Pressure - Release
G3304B and G3306B Engines Engine Monitoring System
G3304B and G3306B Engines Engine Oil Pan - Remove
G3304B and G3306B Engines Engine Oil Pan - Install
G3304B and G3306B Engines Boost Control Valve - Remove
C7.1 Industrial Engine and Generator Set Flash Programming
G3304B and G3306B Engines Engine Cranks but Does Not Start
G3304B and G3306B Engines Boost Control Valve - Disassemble
G3304B and G3306B Engines Boost Control Valve - Assemble
C15 and C18 Tier 4 Final Engines Basic Engine
G3304B and G3306B Engines Boost Control Valve - Install
G3304B and G3306B Engines Engine Does Not Crank