Boost Control Valve - Disassemble
拆卸步骤
开始:
- 拆下增压控制阀。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将卡箍 (1) 、软管和 O 形密封圈 (2) 从增压控制阀上拆下。
Show/hide table
 | |
| 图 1 | g01001744 |
- 在阀体 (3) 和气缸 (5) 上作识别标记，以供组装使用。
Show/hide table
 | |
| 图 2 | g01001751 |
- 拆下螺钉 (4) 和锁紧垫圈。
- 将阀体 (3) 和密封垫从气缸 (5) 上拆下。
- 将阀活塞 (6) 和弹簧 (7) 从气缸 (5) 上拆下。
Show/hide table
 | |
| 图 3 | g01001753 |
- 将环 (8) 从阀活塞 (6) 上拆下。
Show/hide table
 | |
| 图 4 | g01001766 |
Caterpillar Information System:
G3304B and G3306B Engines Engine Cranks but Does Not Start
C7.1 Industrial Engine and Generator Set Flash Programming
G3304B and G3306B Engines Boost Control Valve - Remove
G3304B and G3306B Engines Engine Oil Pan - Install
G3304B and G3306B Engines Engine Oil Pan - Remove
G3304B and G3306B Engines Engine Monitoring System
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes System Pressure - Release
G3304B and G3306B Engines Engine Oil Filter Base - Install
G3304B and G3306B Engines Engine Oil Filter Base - Assemble
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0826 - FMI 04
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0826 - FMI 03
2009/10/01 A New Gasket and Hardware Are Used for the Water Lines In Some 3500 and G3500 Engines {1052, 1380}
G3304B and G3306B Engines Boost Control Valve - Assemble
C15 and C18 Tier 4 Final Engines Basic Engine
G3304B and G3306B Engines Boost Control Valve - Install
G3304B and G3306B Engines Engine Does Not Crank
C15 and C18 Tier 4 Final Engines Cooling System
G3304B and G3306B Engines Engine Misfires, Runs Rough or Is Unstable
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0177 - FMI 03
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0177 - FMI 04
G3304B and G3306B Engines Engine Shutdown Is Intermittent
G3304B and G3306B Engines Engine Stalls Immediately After Starting
G3304B and G3306B Engines Fuel Pressure Problem
G3304B and G3306B Engines Boost Control Valve - Inspect