Engine Oil Filter Base - Assemble
组装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 6V-6640     | 密封胶     | 1     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 如有必要,将采样阀和防尘盖安装到盖 (6) 上。
Show/hide table
图 1 | g01942273 |
Show/hide table
弹簧压缩零件如果安装不当,会伤害人体。 为避免伤害,遵照出版的装配程序,并穿上保护装备。 |
- 将柱塞 (2) 和弹簧 (5) 安装在发动机机油滤清器底座 (1) 中。
- 安装密封垫 (3) 、盖 (6) 、垫圈和螺栓 (4) 。
- 如有必要,将螺塞安装在发动机机油滤清器底座 (1) 上。 安装之前,先将工具 (A) 涂抹在螺塞上。
End By: 安装发动机机油滤清器底座。
Caterpillar Information System:
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0826 - FMI 04
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0826 - FMI 03
2009/10/01 A New Gasket and Hardware Are Used for the Water Lines In Some 3500 and G3500 Engines {1052, 1380}
G3304B and G3306B Engines Engine Oil Filter Base - Disassemble
C15 and C18 Tier 4 Final Engines Lubrication System
C9.3 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
G3304B and G3306B Engines Engine Oil Filter Base - Remove
G3304B and G3306B Engines Engine Oil Cooler - Install
G3304B and G3306B Engines Engine Oil Cooler - Assemble
G3304B and G3306B Engines Engine Oil Cooler - Disassemble
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0702 - FMI 08
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0702 - FMI 04
G3304B and G3306B Engines Engine Oil Filter Base - Install
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes System Pressure - Release
G3304B and G3306B Engines Engine Monitoring System
G3304B and G3306B Engines Engine Oil Pan - Remove
G3304B and G3306B Engines Engine Oil Pan - Install
G3304B and G3306B Engines Boost Control Valve - Remove
C7.1 Industrial Engine and Generator Set Flash Programming
G3304B and G3306B Engines Engine Cranks but Does Not Start
G3304B and G3306B Engines Boost Control Valve - Disassemble
G3304B and G3306B Engines Boost Control Valve - Assemble
C15 and C18 Tier 4 Final Engines Basic Engine
G3304B and G3306B Engines Boost Control Valve - Install