Engine Oil Filter Base - Remove
Removal Procedure
Start By:
- Remove the transmission oil cooler. Refer to Disassembly and Assembly, "Marine Transmission Oil Cooler - Remove and Install".
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Engine Mounted Oil Filter Base
- Disconnect tube assemblies (3) .
Show/hide table
 | |
| Illustration 1 | g01364540 |
- Remove bolts (1) and engine oil filter base (2) .
Caterpillar Information System:
Procedure to Convert from G3.0 Load Cell to G3.5 Load Cell{4480} Procedure to Convert from G3.0 Load Cell to G3.5 Load Cell{4480}
793F and 793F XQ Off-Highway Truck Hydraulic Fan and Steering System Pressure Sensor (Steering)
G3304B and G3306B Engines Electrical Connector - Inspect
G3304B and G3306B Engines ECM - Replace
C18 Marine Generator Set Product Description
3512C and 3516C Marine Auxiliary and Generator Set Engines Product Lifting
3512C and 3516C Marine Auxiliary and Generator Set Engines Plate Locations and Film Locations
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission Electronic Control Unit
C9.3 Tier 4 Final Engines Fuel Filter Base
C9.3 Tier 4 Final Engines Belt Tensioner
CX35-P800 Petroleum Transmission Component Location
C13 Engine and C13 Industrial Engine Fuel Transfer Pump - Remove and Install
C18 Generator Set Engine Oil Filter Base - Install
3512C and 3516C Marine Auxiliary and Generator Set Engines Product Description
C18 Marine Generator Set Safety Messages
C18 Marine Generator Set Model View Illustrations
C9 Marine Engines Marine Towing
3412E and C30 Marine Engines Product Lifting
3412E and C30 Marine Engines Product Storage
793F and 793F XQ Off-Highway Truck Hydraulic Fan and Steering System Check and Relief Valve (Steering)
3512C and 3516C Marine Auxiliary and Generator Set Engines Engine Oil Level - Check
C7.1 Industrial Engine and Generator Set Diagnostic Code Cross Reference
G3304B and G3306B Engines ECM Software - Install
C9.3 Tier 4 Interim Engines Diagnostic Trouble Codes