Fuel Transfer Pump - Remove and Install
- Turn the fuel supply to the “OFF” position.
Show/hide table
Illustration 1 g01918627 - Disconnect tube assembly (2). Remove bolts (1) and fuel transfer pump (3) and the O-ring seal.
- Install fuel transfer pump (3) in the reverse order of removal.
Caterpillar Information System:
320 Variable Gauge OEM Undercarriage Hydraulic System Oil Makeup (Travel System) - VH Undercarriage
G3304B and G3306B Engines Speed/Timing - Test
C9.3 Tier 4 Final Engines Air Inlet and Exhaust System
C9.3 Tier 4 Final Engines Fuel System
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission Transmission Control
C9.3 Engines for Caterpillar Built Machines Test ECM Mode
C9.3 Engines for Caterpillar Built Machines Electronic Service Tool Does Not Communicate
Improved Overload Sensing Capabilities for XQ Generators{4450, 4476} Improved Overload Sensing Capabilities for XQ Generators{4450, 4476}
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission Programmable Parameters
C9.3 Engines for Caterpillar Built Machines ECM Will Not Accept Factory Passwords
C13, C15, and C18 Engines for Caterpillar Built Machines Factory Passwords
2009/05/25 Turbocharger Compressor Wheel {1052, 1053}
CX35-P800 Petroleum Transmission Component Location
C9.3 Tier 4 Final Engines Belt Tensioner
C9.3 Tier 4 Final Engines Fuel Filter Base
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission Electronic Control Unit
3512C and 3516C Marine Auxiliary and Generator Set Engines Plate Locations and Film Locations
3512C and 3516C Marine Auxiliary and Generator Set Engines Product Lifting
C18 Marine Generator Set Product Description
G3304B and G3306B Engines ECM - Replace
G3304B and G3306B Engines Electrical Connector - Inspect
793F and 793F XQ Off-Highway Truck Hydraulic Fan and Steering System Pressure Sensor (Steering)
Procedure to Convert from G3.0 Load Cell to G3.5 Load Cell{4480} Procedure to Convert from G3.0 Load Cell to G3.5 Load Cell{4480}
C18 Generator Set Engine Oil Filter Base - Remove