793F and 793F XQ Off-Highway Truck Hydraulic Fan and Steering System Caterpillar


Check and Relief Valve (Steering)

Usage:

793F D3T


Illustration 1g06051210

Table 1
Specification for 340-1149 Check and Relief Valve Gp 
Item  Qty  Part  Specification Description 
Pressure setting at a flow rate of 10 L/min (2.6 US gpm), 28000 ± 1000 kPa (4061 ± 145 psi)
Maximum operating pressure is 30000 kPa (4351 psi)
Maximum operating flow is 100 L/min (26 US gpm)

------ WARNING! ------

Do not adjust the torque for the nut on the Check and Relief Valve Group. The required torque has been set at the factory. Adjusting the factory torque setting can result in loss of steering system control. Failure to follow the instructions and warnings could result in personal injury or death.


Caterpillar Information System:

3412E and C30 Marine Engines Product Storage
3412E and C30 Marine Engines Product Lifting
C9 Marine Engines Marine Towing
C18 Marine Generator Set Model View Illustrations
C18 Marine Generator Set Safety Messages
3512C and 3516C Marine Auxiliary and Generator Set Engines Product Description
C18 Generator Set Engine Oil Filter Base - Install
C18 Generator Set Engine Oil Filter Base - Remove
Procedure to Convert from G3.0 Load Cell to G3.5 Load Cell{4480} Procedure to Convert from G3.0 Load Cell to G3.5 Load Cell{4480}
793F and 793F XQ Off-Highway Truck Hydraulic Fan and Steering System Pressure Sensor (Steering)
G3304B and G3306B Engines Electrical Connector - Inspect
G3304B and G3306B Engines ECM - Replace
3512C and 3516C Marine Auxiliary and Generator Set Engines Engine Oil Level - Check
C7.1 Industrial Engine and Generator Set Diagnostic Code Cross Reference
G3304B and G3306B Engines ECM Software - Install
C9.3 Tier 4 Interim Engines Diagnostic Trouble Codes
C9.3 Tier 4 Interim Engines Event Codes
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission Input Components
G3304B and G3306B Engines Radiator Group - Remove
G3304B and G3306B Engines Electronic Service Tool Does Not Communicate
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission Output Components
C9 Marine Engines Engine Monitoring System (EMS)
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission Data Link
G3304B and G3306B Engines Factory Password - Obtain
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.