Aftercooler - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7573     | Link Bracket     | 2     |
Start By:
- Remove the turbocharger outlet pressure sensor. Refer to Disassembly and Assembly, "Turbocharger Outlet Pressure Sensor - Remove and Install".
- Remove the inlet air temperature sensor. Refer to Disassembly and Assembly, "Inlet Air Temperature Sensor - Remove and Install".
- Disconnect the negative battery terminal at the battery.
- Turn the external water supply to the OFF position.
- Drain the water from the aftercooler into a suitable container for storage or for disposal.
- Remove tube assemblies (1) and loosen clamp assemblies (2) .
Show/hide table
Illustration 1 | g01734073 |
- Attach Tooling (A) and a suitable lifting device to aftercooler (4). The weight of aftercooler (4) is approximately 36 kg (80 lb).
Show/hide table
Illustration 2 | g01712734 |
- Remove bolts (3) and remove aftercooler (4) .
Caterpillar Information System:
C18 Fire Pump Industrial Engine Cylinder Head - Install
2008/12/22 Troubleshooting the Wastegate Canister {1052, 1057}
2009/01/26 Troubleshooting the Wastegate Canister {1052, 1057}
345D and 349D Excavators C13 Engine Supplement Engine - Install
345D and 349D Excavators C13 Engine Supplement Engine - Remove
C18 Fire Pump Industrial Engine Cylinder Head - Remove
TH48-E80 Petroleum Transmission Oil Filter (Transmission)
345D and 349D Excavators C13 Engine Supplement Fan Drive - Install
345D and 349D Excavators C13 Engine Supplement Fan Drive - Remove
2008/11/10 New Starter Lines Group and Prelube Pump Group Are Used {1319, 1451}
345D and 349D Excavators C13 Engine Supplement Fan - Install
TH55FT-E70 and TH55FT-E90 Transmissions Transmission Warm-up
2008/11/17 Governor Linkage {1151, 1162, 1206, 1264, 1272, 1908}
C18 Fire Pump Industrial Engine Aftercooler - Install
C18 Fire Pump Industrial Engine Aftercooler - Disassemble
TH48-E80 Petroleum Transmission Pressure for Gear Pump (Transmission Charging) - Test and Adjust
C18 Fire Pump Industrial Engine Aftercooler - Assemble
The Incorrect Fuel Enable Valve May Cause a Problem With the Aftertreatment Regeneration Device{1262, 1723} The Incorrect Fuel Enable Valve May Cause a Problem With the Aftertreatment Regeneration Device{1262, 1723}
C15 Petroleum Engines Oil Temperature Is High
C13 On-highway Engine Alternator Mounting
TH48-E70 Petroleum Transmission and TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train Packages Gear Pump (Transmission Charging)
C18 Fire Pump Industrial Engine Control System - Remove and Install
2009/02/23 New Oil Pump {1151, 1162, 1206}
C9.3 Tier 4 Final Engines Water Pump