Product Lifting
发动机起吊
发动机起吊的警告标志位于气门室盖上。
Show/hide table
图 1 | g01020684 |
Show/hide table
不适当的吊具会使被吊装设备翻倒,造成伤害和损坏。 |
Show/hide table
图 2 | g00103219 |
Show/hide table
注意 |
---|
千万不要折弯吊环螺栓和支架。 吊环螺栓和支架只能承受张力负荷。 要记住当支承构件和物体之间的角度小于90°时,吊环螺栓的承载能力变小。 当必须在某一角度搬移部件时,只能使用具有适当额定载荷的连杆支架。 |
使用起重机搬移重的部件。 使用一个可调的吊粱起吊发动机。 所有的支承构件(链条和钢丝绳)应互相平行。 链条和钢丝绳与被吊物的顶面尽可能保持垂直。
有些搬移工作要求用吊装工具吊装,以确保适当的平衡。 吊装工具有助于保证安全。
只在拆卸发动机时,要使用发动机上的吊耳。
吊耳是为特定的发动机装置设计和安装的。 更换吊耳和/或发动机会使吊耳和吊具不能使用。 如果更换了吊环螺栓和/或发动机,则应确保提供合适的起吊装置。 有关正确起吊发动机的吊具资料,请向 Caterpillar 代理商咨询。
Show/hide table
图 3 | g01020524 |
Show/hide table
吊梁尺寸     | |||
发动机     | A     | B     | C     |
3508     | 1096 mm (43.0 in)     |
1112 mm (43.8 in)     |
12° 最多     |
3512     | 1096 mm (43.0 in)     |
1652 mm (65.0 in)     |
12° 最多     |
3516     | 1096 mm (43.0 in)     |
2192 mm (86.3 in)     |
12° 最多     |
Show/hide table
发动机重量     | |
发动机     | 发动机的大约净干重,不包括变速箱的重量 kg(lb)     |
3508B     | 4912 kg (10829 lb)     |
3512B 3512C     |
5766 kg (12712 lb)     |
3516B 3516C     |
8408 kg (18536 lb)     |
起吊整个机组
不要使用发动机吊耳或发电机吊耳来起吊整个机组。 发电机组的底座纵梁上提供了起吊整个机组用的起吊点。 但是,起吊一起起吊发动机和发电机需要采用专门设备和起吊程序。 有关正确起吊整装发动机的吊具资料,请咨询 Caterpillar 代理商。
只起吊发动机
只在拆卸发动机时,要使用发动机上的吊耳。
只起吊发电机
只拆卸发电机时,请使用发电机上的吊耳。
Caterpillar Information System:
2008/07/07 Fuel Transfer Pump {1251}
C27 and C32 Generator Set Engines Flywheel Housing
C6.6 Marine Generator Set Data Link Circuit - Test
G3412C, G3508, G3512 and G3516 Engines Status Control Module Alarm Modules
C18 Generator Set Engine Air Cleaner Service Indicator - Inspect
C27 and C32 Engines for Caterpillar Built Machines Housing (Rear)
C12 Marine Engines Configuration Parameters
325D and 329D Excavators and 325D Material Handler Machine System Specifications Pressure Reducing Valve (Boom Priority)
2008/07/01 New Hose and Clamps are Now Available on Clean Gas Induction (CGI) Coolers {1061, 1087, 108C, 1380}
Installation of the 276-7630 Turbocharger Shield Group {1073} Installation of the 276-7630 Turbocharger Shield Group {1073}
2008/08/25 A New Fuel Pressure Regulator Is Used {1252, 1254}
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Safety Messages
G3520E Generator Set Engines Vibration Damper
3508B, 3512B, 3516B, 3512C and and 3516C Auxiliary Engines, Generator Set Engines, and Generator Sets Customer Assistance
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator Set Vibration - Inspect
C6.6 Marine Generator Set System Pressure Release
2008/07/28 New Fuel Lines Groups are Now Available {1274}
2008/07/07 New Starter Lines Group and Prelube Pump Group Are Used {1319, 1451}
C18 Generator Set Engines Configuration Parameters
3512B Generator Set Engine Fuel Filter
3500B Locomotive Engines Exhaust Manifold
793F and 797F Off-Highway Trucks Power Train Electronic Control System Switch Circuits
2008/11/01 A Single Notched Piston Skirt Is Now Used {1225}
2008/07/14 Support for Fuel Injection Pumps {1251}