Exhaust Manifold
Show/hide table
Illustration 1 | g00899933 |
(1) Gasket
(2) Tighten the nuts and bolts for the exhaust manifold to the following torque.
- C1.5 and C2.2 ... 25 N·m (18.4 lb ft)
- C2.2 Exhaust elbow ... 25 N·m (18.4 lb ft)
Caterpillar Information System:
C1.5 and C2.2 Generator Sets Cylinder Head
C1.5 and C2.2 Generator Sets Cylinder Head Valves
C1.5 and C2.2 Generator Sets Valve Mechanism Cover
C1.5 and C2.2 Generator Sets Rocker Shaft
C1.5 and C2.2 Generator Sets Lifter Group
C1.5 and C2.2 Generator Sets Fuel Injection Nozzles
C1.5 and C2.2 Generator Sets Fuel Injection Pump
C1.5 and C2.2 Generator Sets Fuel Injection Lines
C1.5 and C2.2 Generator Sets Engine Design
C15 and C18 Petroleum Generator Sets Generator Bearing - Lubricate
795F AC and 795F AC XQ Off-Highway Trucks Engine Valve Lash - Check/Adjust
C6.6 Marine Generator Set Belts - Inspect/Adjust/Replace - Single Belt
C1.5 and C2.2 Generator Sets Camshaft
C1.5 and C2.2 Generator Sets Engine Oil Relief Valve
C1.5 and C2.2 Generator Sets Water Temperature Regulator
C1.5 and C2.2 Generator Sets Cylinder Block
C1.5 and C2.2 Generator Sets Crankshaft
C1.5 and C2.2 Generator Sets Connecting Rod Bearing Journal
C1.5 and C2.2 Generator Sets Main Bearing Journal
C1.5 and C2.2 Generator Sets Connecting Rod
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Cylinder Head
C1.5 and C2.2 Generator Sets Glow Plugs
C1.5 and C2.2 Generator Sets Engine Oil Pressure Switch
C1.5 and C2.2 Generator Sets Piston and Rings