Illustration 1 | g01335357 |
Typical example |
Type of fuel injection pump ... In-line cassette
Direction of rotation of the camshaft for the fuel injection pump ... Clockwise from the drive end
(1) Tighten the mounting nuts and setscrews to the following torque.
- C1.5 and C2.2 engines ... 15 N·m (11 lb ft)
(2) Tighten the delivery valve holders to the following torque. ... 42 N·m (31 lb ft)
(3) Shim
The shim adjusts the timing of the fuel injection pump. A thicker shim retards the timing. A thinner shim advances the timing. The timing changes one degree for each 0.10 mm (0.004 inch) difference in the thickness of the shim. More than one shim can be used. If the fuel injection pump is reinstalled, new shims, which have the same thickness as the original shim, must be installed.
If any of the following new components are installed, new shims must be used.
- Camshaft
- Cylinder block
The following thicknesses of shims are available:
- 0.20 mm (0.008 inch)
- 0.30 mm (0.012 inch)
- 0.40 mm (0.016 inch)
- 0.50 mm (0.020 inch)