Lifter Group
Show/hide table
Illustration 1 | g00692979 |
Clearance between the lifter and the bore in the engine for the lifter
-
Standard maximum clearance
- C1.5 and C2.2 engines ... 0.058 mm (0.0023 inch)
- Repair limit for C1.5 and C2.2 engines ... 0.080 mm (0.0031 inch)
Caterpillar Information System:
C1.5 and C2.2 Generator Sets Fuel Injection Nozzles
C1.5 and C2.2 Generator Sets Fuel Injection Pump
C1.5 and C2.2 Generator Sets Fuel Injection Lines
C1.5 and C2.2 Generator Sets Engine Design
C15 and C18 Petroleum Generator Sets Generator Bearing - Lubricate
795F AC and 795F AC XQ Off-Highway Trucks Engine Valve Lash - Check/Adjust
C6.6 Marine Generator Set Belts - Inspect/Adjust/Replace - Single Belt
C6.6 Marine Generator Set Belts - Inspect/Adjust/Replace - Two Belt Set
C6.6 Marine Generator Set Maintenance Interval Schedule
C6.6 Marine Generator Set Engine Wiring Information
C18 Generator Set Engines Sensor Signal (PWM) - Test
Registration of Product Link in EquipmentManager{7606} Registration of Product Link in EquipmentManager{7606}
C1.5 and C2.2 Generator Sets Rocker Shaft
C1.5 and C2.2 Generator Sets Valve Mechanism Cover
C1.5 and C2.2 Generator Sets Cylinder Head Valves
C1.5 and C2.2 Generator Sets Cylinder Head
C1.5 and C2.2 Generator Sets Exhaust Manifold
C1.5 and C2.2 Generator Sets Camshaft
C1.5 and C2.2 Generator Sets Engine Oil Relief Valve
C1.5 and C2.2 Generator Sets Water Temperature Regulator
C1.5 and C2.2 Generator Sets Cylinder Block
C1.5 and C2.2 Generator Sets Crankshaft
C1.5 and C2.2 Generator Sets Connecting Rod Bearing Journal
C1.5 and C2.2 Generator Sets Main Bearing Journal