Coolant Syringe And Battery Fluid Probe Now Available{0651}
Usage:
Both the 5P957 and 5P3514 Tester have a coolant syringe and a battery fluid probe that are easily lost or damaged. In the past if the syringe and/or probe were lost or damaged a complete tester had to be ordered to get a replacement. A 5P9734 Coolant Syringe and a 5P9735 Battery Fluid Probe are now available as replacement parts.
Coolant syringe and battery fluid probe available from parts department.
Caterpillar Information System:
1978/05/08 Timing Dimension For Fuel Injection Pumps Changed; 1P7410 Timing Plates Have More Exact Degree Marks{0650,1250}
1978/05/08 Longer Hoses Used At Radiator Lower Hose Connections{1380}
1978/05/08 New Water Temperature Regulator Housing Cover Has A Check Valve{1380,1355}
1978/05/01 Water Separator Added To Give Protection To The Sleeve Metering Fuel System{1250}
1978/05/01 New 5P7335 Rack Adjusting Tool Available{0654,1257,1264}
1978/05/01 Improved Tube Assemblies For Engine Oil Lines{1307}
1978/05/01 Double-Walled Fuel Injection Lines Protect Unattended Industrial And Marine Engines{1252,0353}
1978/05/01 External (Outside) Oil Lines Now Used Instead Of The Oil Passage In The Cylinder Block And Flywheel Housing{1307}
1978/05/01 O-Ring Seals Of A Different Material Are Now Used On The Outside Diameter Of The Servo Cylinder In Governors{1264}
1978/05/01 Correct Installation Of Lip-Type Seals In Hydraulic Oil Pumps{5055,5073}
1978/05/01 New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets{0650}
1978/05/01 5P8719 Hydraulic Hand Pump Decreases The Time Needed To Move Ram Pistons Under No Load{0621}
1978/05/08 Threads In Aluminum Housings On Hydraulic Pumps Can Be Damaged, If Bolts That Are Too Short Are Used{5073}
1978/05/08 Preparation Of Caterpillar Product For Delivery{7500}
1978/05/15 Parts Information For Vickers Pumps Which Have Steel Backed Bronze Plates Between Rotor And End Plates{5055}
1978/05/15 Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15 Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15 New Drive Belt Idler Pulleys Have Larger Bearings{1358,1359}
1978/05/15 Stronger Fuel Inlet Flanges Prevent Parts Damage And Keeps Air Out Of The Fuel System{1253}
1978/05/22 New Gasket Installed Between Flywheel Housing And Cylinder Block{1157,1201}
1978/05/22 Use New Tools To Adapt Former Cylinder Heads With Counterbores To Cylinder Blocks With Spacer Plates{0600,1100,1101,1201}
1978/05/22 Optional Assembly Procedure For Sperry Vickers Pumps With New Type Cartridges{5055}
1978/05/22 Modification Of Drive Adapter For Fuel Injection Test Bench{0650,1272}
1978/05/22 New Governor Spring Gives Correct Balance Point Speed{1264}