New 5P7335 Rack Adjusting Tool Available{0654,1257,1264}
Usage:
Engines Equipped With Hydra-Mechanical Governor With Rack Adjusting Screw
A new 5P7335 Rack Adjusting Tool is available for use during adjustment of the rack setting in hydra-mechanical governors.
The 5P7335 Rack Adjusting Tool permits you to keep the setting of the rack adjusting screw constant while you tighten the locknut.
The 5P7335 Rack Adjusting Tool has a 6" (152.4 mm) tube with a bar-type handle at the top. A special 1/8" (3.05 mm) hexagonal wrench extends through the tube into the center of a 7/16" (11.11 mm) double hexagonal socket. (See Illustration.)
The 5P7335 Rack Adjusting Tool.
Caterpillar Information System:
1978/05/01 Improved Tube Assemblies For Engine Oil Lines{1307}
1978/05/01 Double-Walled Fuel Injection Lines Protect Unattended Industrial And Marine Engines{1252,0353}
1978/05/01 External (Outside) Oil Lines Now Used Instead Of The Oil Passage In The Cylinder Block And Flywheel Housing{1307}
1978/05/01 O-Ring Seals Of A Different Material Are Now Used On The Outside Diameter Of The Servo Cylinder In Governors{1264}
1978/05/01 Correct Installation Of Lip-Type Seals In Hydraulic Oil Pumps{5055,5073}
1978/05/01 New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets{0650}
1978/05/01 5P8719 Hydraulic Hand Pump Decreases The Time Needed To Move Ram Pistons Under No Load{0621}
1978/04/24 New Oil Pressure Gauge Available For Marine Transmissions Used On D348, D349, D353, D379, D398, D399, 3406 And 3408 Marine Engines{7457,3300}
1978/04/24 Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage{1250}
1978/04/24 Cylinder Block Has New Cover With An Oil Return Connection For Rockford Fan Drive{1201}
1978/04/24 Oil Grooves And Harder Gears Are Now Used In The Oil Pumps On 6.25" Bore Vee Engines{1304}
1978/04/24 Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/05/01 Water Separator Added To Give Protection To The Sleeve Metering Fuel System{1250}
1978/05/08 New Water Temperature Regulator Housing Cover Has A Check Valve{1380,1355}
1978/05/08 Longer Hoses Used At Radiator Lower Hose Connections{1380}
1978/05/08 Timing Dimension For Fuel Injection Pumps Changed; 1P7410 Timing Plates Have More Exact Degree Marks{0650,1250}
1978/05/08 Coolant Syringe And Battery Fluid Probe Now Available{0651}
1978/05/08 Threads In Aluminum Housings On Hydraulic Pumps Can Be Damaged, If Bolts That Are Too Short Are Used{5073}
1978/05/08 Preparation Of Caterpillar Product For Delivery{7500}
1978/05/15 Parts Information For Vickers Pumps Which Have Steel Backed Bronze Plates Between Rotor And End Plates{5055}
1978/05/15 Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15 Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15 New Drive Belt Idler Pulleys Have Larger Bearings{1358,1359}
1978/05/15 Stronger Fuel Inlet Flanges Prevent Parts Damage And Keeps Air Out Of The Fuel System{1253}