Turbocharger
Show/hide table
Illustration 1 | g01625584 |
Typical example |
(1) Torque for the compressor clamp assembly ...
(2) Torque for the turbine clamp assembly ...
Note: Before assembly, apply 4C-5599 Anti-Seize Compound to the threads of three bolts (3) and threads of the locknut (4).
(4) Torque for the locknut ...
Caterpillar Information System:
345D, 349D and 349D2 Excavator Machine System Specifications Pilot Lines - Control Valve
2008/03/17 A New Drain Line for the Turbocharger is Now Used {1052, 1307}
3512C Engine Maintenance Recommendations
Proper Assembly Sequences for Installing Air Inlet Heater Relay (12VDC Relay: 175-2301 Magnetic Switch, 24VDC Relay: 148-0757 Magnetic Switch){1090, 1408} Proper Assembly Sequences for Installing Air Inlet Heater Relay (12VDC Relay: 175-2301 Magnetic Switch, 24VDC Relay: 148-0757 Magnetic Switch){1090, 1408}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290} Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
345D, 349D and 349D2 Excavator Machine System Specifications Pilot Lines - Control Valve
Some 3500 Cylinder Packs May Have Incorrect Pistons{1225} Some 3500 Cylinder Packs May Have Incorrect Pistons{1225}
Procedure to Install a Service Kit for the Unloader for the Air Compressor{1803} Procedure to Install a Service Kit for the Unloader for the Air Compressor{1803}
C32 Marine Engine Refill Capacities and Recommendations
C175-16 and C175-20 Generator Set Engines Air Lines
3516C Locomotive Engine Maintenance Interval Schedule
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Pilot Lines - Joystick
3524B and C175 Engines for Off-Highway Truck/Tractors Fuel Injector
3500 Petroleum Engines and Petroleum Generator Sets Configuration Parameters
345D, 349D and 349D2 Excavator Machine System Specifications Pilot Lines - Pump and Motor
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Boom Cylinder Lines
C175-16 and C175-20 Generator Set Engines System Overview
Replacement Procedure for the Service Meter{7478} Replacement Procedure for the Service Meter{7478}
CB-214E, CB-224E and CB-225E Paving Compactors System Pressure Release
793F and 793F XQ Off-Highway Truck Hydraulic Fan and Steering System Piston Motor (Hydraulic Fan)
345D, 349D and 349D2 Excavator Machine System Specifications Pilot Valve - Boom Down Relief
Software Configuration Guide {3168, 4800, 4808, 7600, 7610, 7620} Software Configuration Guide {3168, 4800, 4808, 7600, 7610, 7620}
Bench Test Procedure For A CX28 On-Highway Transmission {3030, 3073} Bench Test Procedure For A CX28 On-Highway Transmission {3030, 3073}
G3520C and G3520E Generator Set Engines Camshaft - Remove