2008/03/17 Caterpillar


A New Drain Line for the Turbocharger is Now Used {1052, 1307}

Usage:

3406C 1LS
Generator Set:
3406C GEN SET (S/N: C2G1-UP; 1LS1-UP; 9ES1-UP; LRX1-UP)
3406E GEN SET (S/N: 8AZ1-UP)
3456 GEN SET (S/N: CCB1-UP; C1G1-UP; CAH1-UP; CBX1-UP; 9BZ1-UP)
Industrial Engine:
3406B IND DI (S/N: 6TB1-UP)
3406C IND (S/N: 3ER1-UP)
3406E IND (S/N: 6BR1-UP)
3456 IND (S/N: 3LW1-UP)
C-15 IND (S/N: BEM1-UP)
C-16 IND (S/N: BFM1-UP)
C15 IND (S/N: JRE1-UP)
C18 INDUSTRIAL (S/N: WJH1-UP)
Marine Engine:
3406C MARINE (S/N: 1SS1-UP)
C18 MARINE (S/N: CKH1-UP; C1J1-UP)

Description of Change: A new drain line for the turbocharger is now used. The new drain line reduces the chance of leaks.

Adaptable To: The 6N-1141 Oil Drain Tube is now replaced by the 204-7810 Tube As and the 126-2702 Integral Seal.

Caterpillar Information System:

3512C Engine Maintenance Recommendations
Proper Assembly Sequences for Installing Air Inlet Heater Relay (12VDC Relay: 175-2301 Magnetic Switch, 24VDC Relay: 148-0757 Magnetic Switch){1090, 1408} Proper Assembly Sequences for Installing Air Inlet Heater Relay (12VDC Relay: 175-2301 Magnetic Switch, 24VDC Relay: 148-0757 Magnetic Switch){1090, 1408}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290} Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
345D, 349D and 349D2 Excavator Machine System Specifications Pilot Lines - Control Valve
Some 3500 Cylinder Packs May Have Incorrect Pistons{1225} Some 3500 Cylinder Packs May Have Incorrect Pistons{1225}
Procedure to Install a Service Kit for the Unloader for the Air Compressor{1803} Procedure to Install a Service Kit for the Unloader for the Air Compressor{1803}
C32 Marine Engine Refill Capacities and Recommendations
C175-16 and C175-20 Generator Set Engines Air Lines
3516C Locomotive Engine Maintenance Interval Schedule
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Pilot Lines - Joystick
C175-16 and C175-20 Generator Set Engines Air Lines
3516C Locomotive Engine Configuration Parameters
345D, 349D and 349D2 Excavator Machine System Specifications Pilot Lines - Control Valve
C13 On-highway Engine Turbocharger
3524B and C175 Engines for Off-Highway Truck/Tractors Fuel Injector
3500 Petroleum Engines and Petroleum Generator Sets Configuration Parameters
345D, 349D and 349D2 Excavator Machine System Specifications Pilot Lines - Pump and Motor
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Boom Cylinder Lines
C175-16 and C175-20 Generator Set Engines System Overview
Replacement Procedure for the Service Meter{7478} Replacement Procedure for the Service Meter{7478}
CB-214E, CB-224E and CB-225E Paving Compactors System Pressure Release
793F and 793F XQ Off-Highway Truck Hydraulic Fan and Steering System Piston Motor (Hydraulic Fan)
345D, 349D and 349D2 Excavator Machine System Specifications Pilot Valve - Boom Down Relief
Software Configuration Guide {3168, 4800, 4808, 7600, 7610, 7620} Software Configuration Guide {3168, 4800, 4808, 7600, 7610, 7620}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.