Track Carrier Roller
Show/hide table
图 1 | g01437871 |
(1) 组装时,橡胶曲面密封和所有接触面必须清洁干燥。 组装前,先在金属密封环的接触面上涂抹一薄层 6V-4876 润滑剂 。 密封圈必须装配成方形。 橡胶曲面密封不能膨胀也不能扭歪。
(2) 组装后两个托链轮轴承的内径 ... 78.28 ± 0.09 mm (3.082 ± 0.004 in)
(3) 在要密封的 O 形密封圈孔上涂敷润滑剂。
(A) 组装前,必须确保支重轮轴组件在全长范围内没有油漆 ... 80 ± 5 mm (3.1 ± 0.2 in)
(B) 端隙
- 最低 ... 0.3
mm (0.01 in)
- 最高 ... 1.2 mm (0.05 in)
Caterpillar Information System:
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0334 - FMI 03
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Assemble
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Disassemble
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Install
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Remove
568 Forest Machine Machine System Specifications Track Adjuster
C9 Petroleum Engines Inlet Air Temperature Sensor - Remove and Install
C9 Petroleum Engines Turbocharger Outlet Pressure Sensor - Remove and Install
C9 Petroleum Engines Speed/Timing Sensor - Remove and Install
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0333 - FMI 04
C9 Petroleum Engines Injection Actuation Pressure Sensor - Remove and Install
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0333 - FMI 03
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0334 - FMI 04
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0336 - FMI 02
C9 Petroleum Engines Fan Drive Mounting Group - Remove and Install
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0442 - FMI 12
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0443 - FMI 12
G3600 Engines Ignition Primary - Test
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0446 - FMI 12
Relocating the Air Filter Assembly on C4.4 Engines{1051, 1054} Relocating the Air Filter Assembly on C4.4 Engines{1051, 1054}
C9 Petroleum Engines Electronic Control Module - Remove and Install
3500C Marine Engines Vibration Damper
C175 Generator Sets Manual Stop Procedure
2008/02/11 Update on the Factory Password System {1901, 7620}