Transmission Planetary - Install
安装步骤
Show/hide table
需要的工具     | |||
工具     | 零件号     | 零件名称     | 数量     |
A     | 189-0408     | 钩环组件     | 2     |
B     | 1U-9200     | 杠杆式拔拉起重机     | 1     |
C     | 1P-2420     | 变速箱修复台     | 1     |
- 将工具 (A) 和适当的起吊设备连接到变速箱组件 (1) 上。 将工具 (B) 连接到变速箱组件 (1) 上。 变矩器组件 (1) 的重量约为 1108 kg (2440 lb)。
Show/hide table
图 1 | g01439313 |
Show/hide table
图 2 | g01439321 |
- 从工具 (C) 上拆下变速箱组件 (1) 。
- 旋转变速箱组件 (1) ,然后将变矩器组件 (1) 放在地面上。
- 拆下工具 (A) 、工具 (B) 和适当的起吊设备。
End By: 连接变速箱。 请参阅 拆解和组装, "变速箱和变矩器 - 连接"。
Caterpillar Information System:
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Remove
568 Forest Machine Machine System Specifications Track Adjuster
C9 Petroleum Engines Inlet Air Temperature Sensor - Remove and Install
C9 Petroleum Engines Turbocharger Outlet Pressure Sensor - Remove and Install
C9 Petroleum Engines Speed/Timing Sensor - Remove and Install
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0333 - FMI 04
C9 Petroleum Engines Injection Actuation Pressure Sensor - Remove and Install
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0333 - FMI 03
C13 and C15 On-highway Engines Solenoid Valve - Test
C9 Petroleum Engines Fuel Pressure Sensor - Remove and Install
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0269 - FMI 04
2007/12/17 The Caterpillar Digital Voltage Regulator (CDVR) Has been Improved {4467}
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Disassemble
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Assemble
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0334 - FMI 03
349F and 352F Excavators Machine System Specifications Track Carrier Roller
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0334 - FMI 04
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0336 - FMI 02
C9 Petroleum Engines Fan Drive Mounting Group - Remove and Install
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0442 - FMI 12
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0443 - FMI 12
G3600 Engines Ignition Primary - Test
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0446 - FMI 12
Relocating the Air Filter Assembly on C4.4 Engines{1051, 1054} Relocating the Air Filter Assembly on C4.4 Engines{1051, 1054}