Turbocharger Outlet Pressure Sensor - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| |
| Illustration 1 | g01437751 |
- Disconnect harness assembly (1) from turbocharger outlet pressure sensor (2).
- Remove turbocharger outlet pressure sensor (2) and the O-ring seal.
- Install the O-ring seal on turbocharger outlet pressure sensor (2).
- Install turbocharger outlet pressure sensor (2). Tighten turbocharger outlet pressure sensor (2) to a torque of
10 ± 2 N·m (88 ± 18 lb in) . - Connect harness assembly (1) to turbocharger outlet pressure sensor (2).
Show/hide table
|
| |
| Illustration 2 | g01437751 |
Note: Check the O-ring seal for wear or damage. If necessary, replace the O-ring seal.
Caterpillar Information System:
C9 Petroleum Engines Speed/Timing Sensor - Remove and Install
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0333 - FMI 04
C9 Petroleum Engines Injection Actuation Pressure Sensor - Remove and Install
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0333 - FMI 03
C13 and C15 On-highway Engines Solenoid Valve - Test
C9 Petroleum Engines Fuel Pressure Sensor - Remove and Install
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0269 - FMI 04
2007/12/17 The Caterpillar Digital Voltage Regulator (CDVR) Has been Improved {4467}
3176C, 3406E and 3456 Industrial Engines Electrical Connectors
C9 Petroleum Engines Engine Oil Pressure Sensor - Remove and Install
C9 Petroleum Engines Coolant Temperature Sensor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Electronic Service Tool Does Not Communicate
C9 Petroleum Engines Inlet Air Temperature Sensor - Remove and Install
568 Forest Machine Machine System Specifications Track Adjuster
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Remove
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Install
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Disassemble
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Assemble
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0334 - FMI 03
349F and 352F Excavators Machine System Specifications Track Carrier Roller
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0334 - FMI 04
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0336 - FMI 02
C9 Petroleum Engines Fan Drive Mounting Group - Remove and Install
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0442 - FMI 12