C9 Petroleum Engines Caterpillar

Removal Procedure

Show/hide table

Illustration 1	g01437770

1. Disconnect harness assembly (1) from inlet air temperature sensor (2).

2. Remove inlet air temperature sensor (2). Remove the O-ring seal from inlet air temperature sensor (2).

Installation Procedure

Show/hide table

Illustration 2	g01437770

Note: Check the O-ring seal for wear or for damage. If necessary, replace the O-ring seal.

1. Install the O-ring seal onto inlet air temperature sensor (2).

2. Install inlet air temperature sensor (2). Tighten inlet air temperature sensor (2) to a torque of 20 ± 3 N·m (15 ± 2 lb ft).

3. Connect harness assembly (1) onto inlet air temperature sensor (2).