Speed/Timing Sensor - Remove and Install
- Disconnect harness assemblies (2) from speed/timing sensors (1).
Show/hide table
Illustration 2 g01175674 - Remove bolt (3), washer (4), and bracket (5). Remove speed/timing sensors (1). Remove the O-ring seals from speed/timing sensors (1).
Show/hide table
Illustration 1 | g01437674 |
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 5P-3975 | Rubber Lubricant | 1 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Apply Tooling (A) to the O-ring seals prior to installation. Install speed/timing sensors (1).
- Position bracket (5) and install bolt (3) and washer (4). Tighten bolt (3) to a torque of
28 ± 7 N·m (21 ± 5 lb ft) .Show/hide tableIllustration 4 g01437674 - Connect harness assemblies (2) onto speed/timing sensors (1).
Show/hide table
Illustration 3 | g01175674 |
Note: Check the O-ring seals for wear or for damage. If necessary, replace the O-ring seals.
Caterpillar Information System:
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0333 - FMI 04
C9 Petroleum Engines Injection Actuation Pressure Sensor - Remove and Install
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0333 - FMI 03
C13 and C15 On-highway Engines Solenoid Valve - Test
C9 Petroleum Engines Fuel Pressure Sensor - Remove and Install
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0269 - FMI 04
2007/12/17 The Caterpillar Digital Voltage Regulator (CDVR) Has been Improved {4467}
3176C, 3406E and 3456 Industrial Engines Electrical Connectors
C9 Petroleum Engines Engine Oil Pressure Sensor - Remove and Install
C9 Petroleum Engines Coolant Temperature Sensor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Electronic Service Tool Does Not Communicate
C9 Petroleum Engines Atmospheric Pressure Sensor - Remove and Install
C9 Petroleum Engines Turbocharger Outlet Pressure Sensor - Remove and Install
C9 Petroleum Engines Inlet Air Temperature Sensor - Remove and Install
568 Forest Machine Machine System Specifications Track Adjuster
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Remove
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Install
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Disassemble
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Assemble
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0334 - FMI 03
349F and 352F Excavators Machine System Specifications Track Carrier Roller
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0334 - FMI 04
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0336 - FMI 02
C9 Petroleum Engines Fan Drive Mounting Group - Remove and Install