Electronic Control Module - Remove and Install
Start By:
- Remove the fumes disposal group, if necessary. Refer to Disassembly and Assembly, "Crankcase Breather - Remove and Install".
- Loosen allen head screws (5) until harness assemblies (1) can be disconnected. Disconnect harness assemblies (1).
- Disconnect hose assemblies (3).
- Remove bolts (2), the washers, and the spacers. Remove electronic control module (4).
Show/hide table
Illustration 1 | g01275421 |
- Position electronic control module (4) onto the cylinder block. Install bolts (2), the washers, and the spacers.
- Connect hose assemblies (3).
- Connect harness assemblies (1). Tighten allen head screws (5) to a torque of
6 ± 1 N·m (53 ± 9 lb in) .
Show/hide table
Illustration 2 | g01275421 |
End By:
- Install the fumes disposal group, if necessary. Refer to Disassembly and Assembly, "Crankcase Breather - Remove and Install".
Caterpillar Information System:
Relocating the Air Filter Assembly on C4.4 Engines{1051, 1054} Relocating the Air Filter Assembly on C4.4 Engines{1051, 1054}
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0446 - FMI 12
G3600 Engines Ignition Primary - Test
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0443 - FMI 12
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0442 - FMI 12
C9 Petroleum Engines Fan Drive Mounting Group - Remove and Install
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0336 - FMI 02
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0334 - FMI 04
349F and 352F Excavators Machine System Specifications Track Carrier Roller
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0334 - FMI 03
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Assemble
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Disassemble
3500C Marine Engines Vibration Damper
C175 Generator Sets Manual Stop Procedure
2008/02/11 Update on the Factory Password System {1901, 7620}
G3600 Engines Ignition Secondary - Test
2008/02/18 Update on the Factory Password System {1901, 7620}
2008/02/01 Update on the Factory Password System {1901, 7620}
2008/09/29 An Improved Three-Piece Oil Pan Gasket is Now Used {1302, 7555}
Shifting Automated Manual Transmissions{1901} Shifting Automated Manual Transmissions{1901}
G3600 Engines Electrical Power Supply - Test
C13 and C15 On-highway Engines ARD Stationary Regeneration Does Not Activate
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0448 - FMI 12
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0500 - FMI 12