- Wheel Loader
- 950L (S/N: TNS1-UP; LXX1-UP)
- 950M (S/N: EMB1-UP; ENE1-UP; FTR1-UP; LCR1-UP)
- 962L (S/N: MTN1-UP; SXS1-UP)
- 962M (S/N: EJB1-UP; LSE1-UP; RCL1-UP; F2T1-UP)
- 950M (S/N: EMB1-UP; ENE1-UP; FTR1-UP; LCR1-UP)
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.
Problem
Illustration 1 | g06126236 |
View showing area of common failure |
Hoses for the A/C have been failing on certain L and M Series Wheel Loaders. The most common failure mode is a rupture of the hose near the coupling at the A/C condenser core.
Solution
Required Parts | ||||
---|---|---|---|---|
Item | Qty | Part Number | Description | Former Part Number |
1 | 1 | Hose As | ||
2 | 1 | Hose As | ||
3 | 1 | Hose As |
Caterpillar is aware of this problem, and an interim fix has been defined. New A/C hoses are available to replace the current hoses.
Inspect the machine for A/C hose leaks. If the machine appears to have an A/C hose leak, verify the source of the leak and replace with the new part number.
Report any feedback regarding this CPI# 376276-226173 issue to Caterpillar by completing a CPI Feedback Form at Service Information Management System (SIMS). The link to SIMS can be found on SIS web.