Axle Oil Cooler Pump and Motor - Remove and Install
Start By:
- Remove the transmission guard.
- Drain the hydraulic oil into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change"
- Drain the rear axle oil into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for the proper amount of fluid.
Show/hide table
Illustration 1 g01453227 - Disconnect hose assemblies (1).
Show/hide table
Illustration 2 g01453229 - Remove bolts (2). Use two people to remove axle oil cooler pump and motor (3).
- Install the axle oil cooler pump and motor in the reverse order of removal.
- Fill the Axle oil. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for the proper amount of fluid.
- Fill the hydraulic oil. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
End By:
- Install the transmission guard.
Caterpillar Information System:
992K Wheel Loader Systems Bucket - Rock
992K Wheel Loader Systems Bucket - Rock
D6T Track-Type Tractor Machine Systems Hydraulic Tank - Remove and Install
Aircraft Loading Fork Attachment (ALFA) Transport Position
H80 S Hydraulic Hammers Tool Retaining Pins - Inspect/Replace
980L Tier 3 Wheel Loader Engine Supplement Muffler - Remove and Install
TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Hydraulic Cylinder - Remove and Install - Tilt Cylinder
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Steering Control Support
950GC Wheel Loader Engine Supplement Exhaust Back Pressure Valve - Remove and Install
Hoses for the A/C Leak on Certain L and M Series Wheel Loaders {1808, 7320} Hoses for the A/C Leak on Certain L and M Series Wheel Loaders {1808, 7320}
854K Wheel Dozer Systems Solenoid Valve (Hydraulic Lockout)
C9.3B Aftertreatment Systems SCR Catalyst Inlet Temperature Sensor - Test
994K Wheel Loader Power Train Axle Oil Cooler Pump and Motor - Disassemble
994K Wheel Loader Power Train Axle Oil Cooler Pump and Motor - Assemble
Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100} Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}
D6T Track-Type Tractor Machine Systems Hydraulic Tank - Disassemble
Installation of the 520-6470 Blank Hook As. on Certain Wheel Loaders {6102} Installation of the 520-6470 Blank Hook As. on Certain Wheel Loaders {6102}
TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Hydraulic Cylinder - Remove and Install - Quick Coupler (Dedicated Wedge Lock) Cylinder
990K Wheel Loader Systems Modulating Valve - Torque Convertor Lockup Clutch
TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Swivel - Remove and Install - Quick Coupler Dedicated Wedge Lock
992K Wheel Loader Systems Control Valve
980M Tier 4 and 982M Tier 4 Wheel Loader Engine Supplement Turbocharger - Remove and Install
TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Swivel - Remove and Install - Quick Coupler S-Type
990K Wheel Loader Systems Selector and Pressure Control Valve (Transmission)