Tool Retaining Pins - Inspect/Replace
Show/hide table
Ilustrace 1 | g02966716 |
- Demontujte čep z kladiva.
- Zkontrolujte čep, zda není opotřebený či prasklý.
- Změřte velikost opotřebení. Porovnejte rozměr (D1) s rozměrem (D2). Rozdíl mezi rozměrem (D1) a rozměrem (D2) musí být menší než
2.0 mm (0.07 inch) . Pokud je rozdíl větší než2.0 mm (0.07 inch) , je nutné čep vyměnit. - Pokud je čep prasklý, je nutné jej vyměnit.
Caterpillar Information System:
980L Tier 3 Wheel Loader Engine Supplement Muffler - Remove and Install
TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Hydraulic Cylinder - Remove and Install - Tilt Cylinder
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Steering Control Support
950GC Wheel Loader Engine Supplement Exhaust Back Pressure Valve - Remove and Install
Hoses for the A/C Leak on Certain L and M Series Wheel Loaders {1808, 7320} Hoses for the A/C Leak on Certain L and M Series Wheel Loaders {1808, 7320}
854K Wheel Dozer Systems Solenoid Valve (Hydraulic Lockout)
C9.3B Aftertreatment Systems SCR Catalyst Inlet Temperature Sensor - Test
C9.3B Aftertreatment Systems DEF Pump Motor - Test
C9.3B Aftertreatment Systems ARD Nozzle Heater - Test
C9.3B Aftertreatment Systems ARD Ignition - Test
C7.1 Engines and Generator Sets ARD Failed to Ignite
C9.3B Aftertreatment Systems ARD Fuel Supply - Test
Aircraft Loading Fork Attachment (ALFA) Transport Position
D6T Track-Type Tractor Machine Systems Hydraulic Tank - Remove and Install
992K Wheel Loader Systems Bucket - Rock
992K Wheel Loader Systems Bucket - Rock
994K Wheel Loader Power Train Axle Oil Cooler Pump and Motor - Remove and Install
994K Wheel Loader Power Train Axle Oil Cooler Pump and Motor - Disassemble
994K Wheel Loader Power Train Axle Oil Cooler Pump and Motor - Assemble
Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100} Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}
D6T Track-Type Tractor Machine Systems Hydraulic Tank - Disassemble
Installation of the 520-6470 Blank Hook As. on Certain Wheel Loaders {6102} Installation of the 520-6470 Blank Hook As. on Certain Wheel Loaders {6102}
TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Hydraulic Cylinder - Remove and Install - Quick Coupler (Dedicated Wedge Lock) Cylinder
990K Wheel Loader Systems Modulating Valve - Torque Convertor Lockup Clutch