Exhaust Back Pressure Valve - Remove and Install
Start By:
- Turn the battery disconnect switch to the "Off" position.
- Disconnect hose assemblies (1) and (5).
- Disconnect harness assembly (3).
- Loosen clamps (2) and remove exhaust back pressure valve (4).
Show/hide table
| |
| Illustration 1 | g06145077 |
- Install the exhaust back pressure valve (4) in the reverse order of removal.
Caterpillar Information System:
Hoses for the A/C Leak on Certain L and M Series Wheel Loaders {1808, 7320} Hoses for the A/C Leak on Certain L and M Series Wheel Loaders {1808, 7320}
854K Wheel Dozer Systems Solenoid Valve (Hydraulic Lockout)
C9.3B Aftertreatment Systems SCR Catalyst Inlet Temperature Sensor - Test
C9.3B Aftertreatment Systems DEF Pump Motor - Test
C9.3B Aftertreatment Systems ARD Nozzle Heater - Test
C9.3B Aftertreatment Systems ARD Ignition - Test
C7.1 Engines and Generator Sets ARD Failed to Ignite
C9.3B Aftertreatment Systems ARD Fuel Supply - Test
C9.3B Aftertreatment Systems ARD Combustion Air - Test
C9.3B Aftertreatment Systems Aftertreatment Identification Module - Test
C9.3B Aftertreatment Systems Aftertreatment Cooling Fan - Test
C9.3B Aftertreatment Systems SCR Warning System Problem
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Steering Control Support
TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Hydraulic Cylinder - Remove and Install - Tilt Cylinder
980L Tier 3 Wheel Loader Engine Supplement Muffler - Remove and Install
H80 S Hydraulic Hammers Tool Retaining Pins - Inspect/Replace
Aircraft Loading Fork Attachment (ALFA) Transport Position
D6T Track-Type Tractor Machine Systems Hydraulic Tank - Remove and Install
992K Wheel Loader Systems Bucket - Rock
992K Wheel Loader Systems Bucket - Rock
994K Wheel Loader Power Train Axle Oil Cooler Pump and Motor - Remove and Install
994K Wheel Loader Power Train Axle Oil Cooler Pump and Motor - Disassemble
994K Wheel Loader Power Train Axle Oil Cooler Pump and Motor - Assemble
Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100} Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}