Gear Motor (Axle Oil Cooler Fan) - Remove and Install
Start By:
- Steering fame lock separate and connect.
- Wheel chock (front, rear).
- System pressure release.
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 6V-3010 | Puller Gp | 1 |
8T-0100 | Bolt | 2 | |
9M-1974 | Hard Washer | 2 |
Show/hide table
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin. |
Show/hide table
Illustration 1 | g06115129 |
Show/hide table
Illustration 2 | g06115228 |
Show/hide table
Illustration 3 | g06115245 |
Show/hide table
Illustration 4 | g06115254 |
Show/hide table
Illustration 5 | g06115263 |
Show/hide table
Illustration 6 | g06115277 |
Show/hide table
Illustration 7 | g06115292 |
Show/hide table
Illustration 8 | g06115304 |
Show/hide table
Illustration 9 | g06115313 |
- Install gear motor hydraulic fan in the reverse order of removal.
Caterpillar Information System:
340F Excavator Machine Systems Travel Motor Lines
854K Wheel Dozer Monitoring System
374F Excavator Fuel Transfer Pump (Refueling) - If Equipped
D11T Track-Type Tractor Undercarriage - Clean
A New Procedure To Route Wire Harness Under Right-Hand And Left-Hand Console Covers On Certain D6T Track-Type Tractors {1408, 7329} A New Procedure To Route Wire Harness Under Right-Hand And Left-Hand Console Covers On Certain D6T Track-Type Tractors {1408, 7329}
340F Excavator Machine Systems Stick Lines
980L Medium Wheel Loaders Sensor Signal (Analog, Active) - Test
980L Medium Wheel Loaders Relay - Test
994K Wheel Loader Power Train Access Doors/Covers - Remove and Install - Ladders and Walkway
980L Medium Wheel Loaders Parameter - Test
340F Excavator Machine Systems Stick Cylinder Lines
C9.3 Tier 4 Final Engines Diesel Exhaust Fluid Lines
994K Wheel Loader Power Train Axle Shaft - Remove and Install
MD6250 Rotary Drill Systems Operational Checks (Hydraulic System)
980L Medium Wheel Loaders Sensor Signal (Analog, Passive) - Test
980L Medium Wheel Loaders Sensor Signal (PWM) - Test
994K Wheel Loader Power Train Axle Oil Cooler - Remove and Install
D6T Track Type Tractor Power Train Steering Differential and Brake - Disassemble
980L Medium Wheel Loaders Sensor Supply - Test
950 GC Wheel Loader Braking and Hydraulic Fan System Control Manifold (Charging Valve for the Brake Accumulators) - Test and Adjust
950 GC Wheel Loader Braking and Hydraulic Fan System Service Brake System Pressure - Test
950 GC Wheel Loader Braking and Hydraulic Fan System Limit Switch (Stop Light) - Adjust
D6T Track Type Tractor Power Train Steering Differential and Brake - Assemble
950 GC Wheel Loader Braking and Hydraulic Fan System Brake System Air - Purge