340F Excavator Machine Systems Caterpillar


Stick Cylinder Lines

Usage:

340F DWK


Illustration 1g06115419

Table 1
Specification for 499-7251 Stick Cylinder Lines Gp 
Item  Qty  Part  Specification description 
The distance from the centerline of the mounting pin to the support assembly is 580 ± 3 mm (22.8 ± 0.1 inch)
148-8370 Elbow As  Torque to 76 ± 4 N·m (56 ± 3 lb ft)
8T-4196 Bolt  Torque to 32 ± 6 N·m (283 ± 53 lb in)
Orient the support assemblies to an angle of 24.5 ± 3.0 degrees. 

Caterpillar Information System:

C9.3 Tier 4 Final Engines Diesel Exhaust Fluid Lines
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Electrical Power Supply - Test
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Data Link - Test
D6T Track Type Tractor Power Train Final Drive - Assemble
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Has Mechanical Noise (Knock)
910M, 914M and 918M Wheel Loader Power Train Gear Motor - Assemble
Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900} Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900}
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Has Early Wear
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Does Not Crank
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Cranks but Does Not Start
910M, 914M and 918M Wheel Loader Power Train Gear Motor - Disassemble
950 GC Wheel Loader Hydraulic System Ride Control System
980L Medium Wheel Loaders Parameter - Test
994K Wheel Loader Power Train Access Doors/Covers - Remove and Install - Ladders and Walkway
980L Medium Wheel Loaders Relay - Test
980L Medium Wheel Loaders Sensor Signal (Analog, Active) - Test
340F Excavator Machine Systems Stick Lines
A New Procedure To Route Wire Harness Under Right-Hand And Left-Hand Console Covers On Certain D6T Track-Type Tractors {1408, 7329} A New Procedure To Route Wire Harness Under Right-Hand And Left-Hand Console Covers On Certain D6T Track-Type Tractors {1408, 7329}
D11T Track-Type Tractor Undercarriage - Clean
374F Excavator Fuel Transfer Pump (Refueling) - If Equipped
854K Wheel Dozer Monitoring System
340F Excavator Machine Systems Travel Motor Lines
994K Wheel Loader Power Train Gear Motor (Axle Oil Cooler Fan) - Remove and Install
994K Wheel Loader Power Train Axle Shaft - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.