Access Doors/Covers - Remove and Install - Ladders and Walkway
Start By:
- Remove the access doors/covers.
Show/hide table
Illustration 1 | g06115457 |
Show/hide table
Illustration 2 | g06115460 |
Show/hide table
Illustration 3 | g06115483 |
Show/hide table
Illustration 4 | g06115491 |
Show/hide table
Illustration 5 | g06115495 |
Show/hide table
Illustration 6 | g06115498 |
- Install ladders and walkway in the reverse order of removal.
Caterpillar Information System:
980L Medium Wheel Loaders Parameter - Test
340F Excavator Machine Systems Stick Cylinder Lines
C9.3 Tier 4 Final Engines Diesel Exhaust Fluid Lines
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Electrical Power Supply - Test
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Data Link - Test
D6T Track Type Tractor Power Train Final Drive - Assemble
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Has Mechanical Noise (Knock)
910M, 914M and 918M Wheel Loader Power Train Gear Motor - Assemble
Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900} Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900}
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Has Early Wear
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Does Not Crank
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Cranks but Does Not Start
980L Medium Wheel Loaders Relay - Test
980L Medium Wheel Loaders Sensor Signal (Analog, Active) - Test
340F Excavator Machine Systems Stick Lines
A New Procedure To Route Wire Harness Under Right-Hand And Left-Hand Console Covers On Certain D6T Track-Type Tractors {1408, 7329} A New Procedure To Route Wire Harness Under Right-Hand And Left-Hand Console Covers On Certain D6T Track-Type Tractors {1408, 7329}
D11T Track-Type Tractor Undercarriage - Clean
374F Excavator Fuel Transfer Pump (Refueling) - If Equipped
854K Wheel Dozer Monitoring System
340F Excavator Machine Systems Travel Motor Lines
994K Wheel Loader Power Train Gear Motor (Axle Oil Cooler Fan) - Remove and Install
994K Wheel Loader Power Train Axle Shaft - Remove and Install
MD6250 Rotary Drill Systems Operational Checks (Hydraulic System)
980L Medium Wheel Loaders Sensor Signal (Analog, Passive) - Test