994K Wheel Loader Power Train Caterpillar


Axle Oil Cooler - Remove and Install

Usage:

994K MM9

Removal Procedure

Start By:

  1. Steering frame lock.

  2. Wheel Chock (front rear).

  3. System pressure release.


Illustration 1g06116177


Illustration 2g06116246


Illustration 3g06117428


Illustration 4g06117460

Installation Procedure

  1. Install axle oil cooler in the reverse order of removal.

Caterpillar Information System:

980L Medium Wheel Loaders Sensor Signal (PWM) - Test
980L Medium Wheel Loaders Sensor Signal (Analog, Passive) - Test
MD6250 Rotary Drill Systems Operational Checks (Hydraulic System)
994K Wheel Loader Power Train Axle Shaft - Remove and Install
994K Wheel Loader Power Train Gear Motor (Axle Oil Cooler Fan) - Remove and Install
340F Excavator Machine Systems Travel Motor Lines
854K Wheel Dozer Monitoring System
374F Excavator Fuel Transfer Pump (Refueling) - If Equipped
D11T Track-Type Tractor Undercarriage - Clean
A New Procedure To Route Wire Harness Under Right-Hand And Left-Hand Console Covers On Certain D6T Track-Type Tractors {1408, 7329} A New Procedure To Route Wire Harness Under Right-Hand And Left-Hand Console Covers On Certain D6T Track-Type Tractors {1408, 7329}
340F Excavator Machine Systems Stick Lines
980L Medium Wheel Loaders Sensor Signal (Analog, Active) - Test
D6T Track Type Tractor Power Train Steering Differential and Brake - Disassemble
980L Medium Wheel Loaders Sensor Supply - Test
950 GC Wheel Loader Braking and Hydraulic Fan System Control Manifold (Charging Valve for the Brake Accumulators) - Test and Adjust
950 GC Wheel Loader Braking and Hydraulic Fan System Service Brake System Pressure - Test
950 GC Wheel Loader Braking and Hydraulic Fan System Limit Switch (Stop Light) - Adjust
D6T Track Type Tractor Power Train Steering Differential and Brake - Assemble
950 GC Wheel Loader Braking and Hydraulic Fan System Brake System Air - Purge
Improved Connecting Rod Bolts Are Now Used on Certain C11 and C13 Machine Engines {1225} Improved Connecting Rod Bolts Are Now Used on Certain C11 and C13 Machine Engines {1225}
950 GC Wheel Loader Braking and Hydraulic Fan System Parking Brake - Manual Release
950 GC Wheel Loader Braking and Hydraulic Fan System Parking Brake Actuator - Adjust
910M, 914M, 918M, 910K, and 914K Compact Wheel Loaders, Engine Supplement Cooling System Package - Remove and Install
910M, 914M, 918M, 910K, and 914K Compact Wheel Loaders, Engine Supplement Fuel Priming Pump and Primary Fuel Filter - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.