New Service Tools Available {0600}
Usage:
The chart shows new tools available from Caterpillar. More detailed information is given in the Tool Announcement for each tool. The Tool Announcements have been distributed and a copy should be filed in the Tool Guide.
Some tools have a Special Instruction that shows how to use the tool. If available, the Special Instruction Form Number is shown in the last column of the chart along with the Tool Announcement form number.
Dealers in NACD, COSA and Caterpillar Americas can order drawings of Fabricated Tools (FT) from the address that follows. When ordering, be sure to include your dealer code and address so your request will receive immediate attention. All other dealers can order drawings from their Subsidiary Service Departments.
AD180 Publications Print Room
600 West Washington Street
East Peoria, IL 61630-0371 (U.S.A.)
Phone: 309-675-7292
Telex: TRT 190425
Caterpillar Information System:
1987/03/23 New Clamps And Grommets For Turbocharger Oil Lines{1300,1307,1052}
1987/03/23 Gasket Removed From Flywheel Housing Cover Groups{1157}
1987/03/23 Improved Fuel Transfer Pump Cover; Weep Hole Moved{1255}
1987/03/23 Pleasure Craft Cruise Kits Available{1000}
1987/03/23 Some Components Of The Transmission Mounting Group For Allison AT540 And AT545 Transmissions Are No Longer Serviced By Caterpillar{3279,1013,3009}
1987/03/23 Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23 Dispenser Available For Shop Towels{0600}
1987/03/23 5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23 Cooling System Conditioner{1395,1350}
1987/03/23 Easy Five-Minute Coolant Conditioner Test With 8T5296 Coolant Conditioner Test Kit{1395,0786}
1987/03/16 Remanufactured Cylinder Heads For 3406 Engines{1100}
1987/03/16 New Voltage Regulators Used On SR-4 Generators{4450}
1987/03/30 Piston Cooling Jets No Longer Used In Some Applications {1200}
1987/03/30 Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30 New Washer Used In Fuel Transfer Pump Group {1256}
1987/03/30 Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30 Oversize Piston Ring Seal Available For Clutch Group {3302,3300}
1987/04/06 Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06 Improved Governor Performance{1264,1250}
1987/04/06 Engine Identification Plate Information For 3406B (PEEC) Truck Engines{0782,1250}
1987/04/06 Rerate Plates And 4W5140 Engine Information Plate Available For Use When Rerating 3406B (PEEC) Truck Engines{0782,1250}
1987/04/06 New Idler Shaft And Sealing Washers Used In Front Gears And Accessory Drives{1206,1207}
1987/04/06 Longer Bolts With Spacers Now Used On Exhaust Manifolds{1059}
1987/04/13 Checking Injector Synchronization On Engines Equipped With New 11.0 mm Injectors{1290}