| |
| Illustration 1 | g03564737 |
|
(8) Power Train Oil Filler
(9) Power Train Oil Dipstick (10) Breather | |
Power train oil filler (8) and power train oil dipstick (9) is located in the front compartment on the right fender. This location is in front of the hydraulic oil tank.
Breather (1) is installed on the side of power train oil filler (8).
| |
| Illustration 2 | g03564781 |
Torque divider is located behind the engine between the flywheel housing and the main drive shaft. T
Reference: Refer to Torque Divider, UENR4100 for additional information.
| |
| Illustration 3 | g06168702 |
Torque converter inlet relief valve is located behind the lower portion of lubrication distribution manifold. Lubrication distribution manifold is at the left front of the main case.
Reference: Refer to Torque Divider, UENR4100 for additional information.
Transmission Hydraulic Control
| |
| Illustration 4 | g03565216 |
Transmission hydraulic control is on top of transmission. Main relief valve is contained in the transmission hydraulic control.
Reference: Refer to Transmission Hydraulic Control, UENR4100 for additional information.
| |
| Illustration 5 | g03565238 |
Transfer and bevel gears are located inside the transmission and bevel gear case.
Reference: Refer to Transfer and Bevel Gears, UENR4100 for additional information.
| |
| Illustration 6 | g03565259 |
The service brakes are located within housing behind final drives.
Reference: Refer to Brake System, UENR4100 for additional information.
| |
| Illustration 7 | g03565275 |
The final drives are on either side of the machine toward the rear.
Reference: Refer to Final Drive, UENR4100 for additional information.