A Heavy Duty Push Arm Step is now Available for Certain D6T and D7E Track-Type Tractors {6061, 6063, 7256}
- Track-Type Tractor:
- D6T (S/N: ZJB1-UP; SLJ1-UP; GMK1-UP; TSM1-UP; WLM1-UP; JRW1-UP)
- D7E (S/N: HKA1-UP; TJA1-UP; SSH1-UP; TAN1-UP)
A heavy-duty push-arm step is now available for certain D6T and D7E Track-Type Tractors. The heavy-duty step is less susceptible to damage from material around the push-arms.
Show/hide table
| Required Parts | ||||
| Item | Qty | Part Number | Description | Former Part Number |
| 1 | 2 | 441-9377 | Plate As | 349-6055 |
Show/hide table
 | |
| Illustration 1 | g03821441 |
441-9377 Plate As (1) is a direct replacement for 349-6055 Plate As and can be installed using the existing 8T-4956 Bolts and 7X-3391 Hard Washers.
Caterpillar Information System:
D6R2 Track-Type Tractor Machine Systems Blower Motor (Air Conditioner, Heater) - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Inlet Manifold Temperature Sensor
D6N Track-Type Tractor Electrohydraulic System Relay - Test
G3600 A4 Engines Pressure Sensor
D8T Track-Type Tractor Location of Components (Hydraulic System)
D8T Track-Type Tractor Piston Motor (Fan Drive)
D6R2 Track-Type Tractor Machine Systems Refrigerant Condenser - Remove and Install
D8T Track-Type Tractor Location of Components (Fan Hydraulic System)
Procedure for Replacing the Actuator on Certain H Series Wheel Tractor-Scrapers Equipped with Powered Access Ladders{7254} Procedure for Replacing the Actuator on Certain H Series Wheel Tractor-Scrapers Equipped with Powered Access Ladders{7254}
924K, 926M, 930K, 930M, 938K and 938M Wheel Loaders Information Display General Information
C7.1 Engines Power Take-Off - Test
2015/04/01 A New Dust Ejector Tube Assembly and a High Efficiency Filter (UHE) Are Available for Certain 950K and 962K Wheel Loaders In Heavy Dust Applications {1068}
953K and 963K Track-Type Loaders Condenser (Refrigerant) - Clean
D6R2 Track-Type Tractor Machine Systems Refrigerant Accumulator - Remove and Install
D3K2, D4K2 and D5K2 Track-Type Tractors Machine Systems Bulldozer C-Frame (VPAT) - Remove and Install
2015/06/10 A New Special Instruction , "Procedure for Replacing the Actuator on Certain H Series Wheel Tractor-Scrapers Equipped with Powered Access Ladders" is Now Available {7254}
D6R2 Track-Type Tractor Machine Systems Piston Motor (Steering) - Remove and Install
924K, 926M, 930K, 930M, 938K and 938M Wheel Loaders Information Display Display Menu
D8T Track-Type Tractor Location of Components (Power Train System)
953K and 963K Track-Type Loaders Fuel System Filter (In-Line) - Replace
953K and 963K Track-Type Loaders Cab Filter (Recirculation) - Clean/Inspect/Replace
Procedure to Install VIMS Application Module for Payload on all Underground Articulated Trucks {7610, 7620} Procedure to Install VIMS Application Module for Payload on all Underground Articulated Trucks {7610, 7620}
336, 336 GC and 340 Excavator Systems Stick - 7.1 m (23.32 ft)
336F and 340F Excavators Machine System Specifications Auxiliary Hydraulic Lines