D6R2 Track-Type Tractor Machine Systems Caterpillar


Refrigerant Accumulator - Remove and Install

Usage:

D6R LGP PPP

Removal Procedure

Start By:

  1. Remove the middle bottom guard.

------ WARNING! ------

Personal injury can result from contact with refrigerant.

Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.

Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.

Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.

Personal injury or death can result from inhaling refrigerant through a lit cigarette.

Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.

Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.

Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.


  1. Recover the refrigerant. Refer to Service Manual, SENR5664, "All Products Air Conditioning and Heating R134a for All Caterpillar Machines" for the recovery and the charging procedure. Refer to Special Publication, NENG2500, "Air Conditioning Tools" for the correct tools.


    Illustration 1g03820639

  2. Disconnect hose assemblies (1).

  3. Remove bolts (2), the clamp, and refrigerant accumulator (3).

Installation Procedure

  1. Install refrigerant accumulator (3) in the reverse order of removal.

Caterpillar Information System:

953K and 963K Track-Type Loaders Condenser (Refrigerant) - Clean
2015/04/03 A Heavy Duty Push Arm Step is now Available for Certain D6T and D7E Track-Type Tractors {6061, 6063, 7256}
D6R2 Track-Type Tractor Machine Systems Blower Motor (Air Conditioner, Heater) - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Inlet Manifold Temperature Sensor
D6N Track-Type Tractor Electrohydraulic System Relay - Test
G3600 A4 Engines Pressure Sensor
D8T Track-Type Tractor Location of Components (Hydraulic System)
D8T Track-Type Tractor Piston Motor (Fan Drive)
D6R2 Track-Type Tractor Machine Systems Refrigerant Condenser - Remove and Install
D8T Track-Type Tractor Location of Components (Fan Hydraulic System)
Procedure for Replacing the Actuator on Certain H Series Wheel Tractor-Scrapers Equipped with Powered Access Ladders{7254} Procedure for Replacing the Actuator on Certain H Series Wheel Tractor-Scrapers Equipped with Powered Access Ladders{7254}
924K, 926M, 930K, 930M, 938K and 938M Wheel Loaders Information Display General Information
D3K2, D4K2 and D5K2 Track-Type Tractors Machine Systems Bulldozer C-Frame (VPAT) - Remove and Install
2015/06/10 A New Special Instruction , "Procedure for Replacing the Actuator on Certain H Series Wheel Tractor-Scrapers Equipped with Powered Access Ladders" is Now Available {7254}
D6R2 Track-Type Tractor Machine Systems Piston Motor (Steering) - Remove and Install
924K, 926M, 930K, 930M, 938K and 938M Wheel Loaders Information Display Display Menu
D8T Track-Type Tractor Location of Components (Power Train System)
953K and 963K Track-Type Loaders Fuel System Filter (In-Line) - Replace
953K and 963K Track-Type Loaders Cab Filter (Recirculation) - Clean/Inspect/Replace
Procedure to Install VIMS Application Module for Payload on all Underground Articulated Trucks {7610, 7620} Procedure to Install VIMS Application Module for Payload on all Underground Articulated Trucks {7610, 7620}
336, 336 GC and 340 Excavator Systems Stick - 7.1 m (23.32 ft)
336F and 340F Excavators Machine System Specifications Auxiliary Hydraulic Lines
336, 336 GC and 340 Excavator Systems Stick Lines
C2.2 Engines For Caterpillar Built Machines General Information
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.