953K and 963K Track-Type Loaders Caterpillar


Condenser (Refrigerant) - Clean

Usage:

953K JNR


OZNÁMENÍ

Při nadměrném znečištění použijte při čištění kondenzoru kartáč. Nepoužívejte tvrdý kartáč, aby nedošlo k zohýbání žeber na kondenzoru.

Pokud jsou žebra poškozena, proveďte jejich opravu.




Ilustrace 1g03820596

  1. Odstraňte kryt kondenzátoru.

  2. Prohlédněte kondenzor, zda není zanesený nečistotami. Vyčistěte kondenzor podle potřeby.

  3. Všechen prach a nečistoty usazené na kondenzátoru umyjte čistou vodou.

  4. Připevněte zpět kryt kondenzátoru.

Caterpillar Information System:

2015/04/03 A Heavy Duty Push Arm Step is now Available for Certain D6T and D7E Track-Type Tractors {6061, 6063, 7256}
D6R2 Track-Type Tractor Machine Systems Blower Motor (Air Conditioner, Heater) - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Inlet Manifold Temperature Sensor
D6N Track-Type Tractor Electrohydraulic System Relay - Test
G3600 A4 Engines Pressure Sensor
D8T Track-Type Tractor Location of Components (Hydraulic System)
D8T Track-Type Tractor Piston Motor (Fan Drive)
D6R2 Track-Type Tractor Machine Systems Refrigerant Condenser - Remove and Install
D8T Track-Type Tractor Location of Components (Fan Hydraulic System)
Procedure for Replacing the Actuator on Certain H Series Wheel Tractor-Scrapers Equipped with Powered Access Ladders{7254} Procedure for Replacing the Actuator on Certain H Series Wheel Tractor-Scrapers Equipped with Powered Access Ladders{7254}
924K, 926M, 930K, 930M, 938K and 938M Wheel Loaders Information Display General Information
C7.1 Engines Power Take-Off - Test
D6R2 Track-Type Tractor Machine Systems Refrigerant Accumulator - Remove and Install
D3K2, D4K2 and D5K2 Track-Type Tractors Machine Systems Bulldozer C-Frame (VPAT) - Remove and Install
2015/06/10 A New Special Instruction , "Procedure for Replacing the Actuator on Certain H Series Wheel Tractor-Scrapers Equipped with Powered Access Ladders" is Now Available {7254}
D6R2 Track-Type Tractor Machine Systems Piston Motor (Steering) - Remove and Install
924K, 926M, 930K, 930M, 938K and 938M Wheel Loaders Information Display Display Menu
D8T Track-Type Tractor Location of Components (Power Train System)
953K and 963K Track-Type Loaders Fuel System Filter (In-Line) - Replace
953K and 963K Track-Type Loaders Cab Filter (Recirculation) - Clean/Inspect/Replace
Procedure to Install VIMS Application Module for Payload on all Underground Articulated Trucks {7610, 7620} Procedure to Install VIMS Application Module for Payload on all Underground Articulated Trucks {7610, 7620}
336, 336 GC and 340 Excavator Systems Stick - 7.1 m (23.32 ft)
336F and 340F Excavators Machine System Specifications Auxiliary Hydraulic Lines
336, 336 GC and 340 Excavator Systems Stick Lines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.