Additional Metal Surface Reconditioning Products Available From Caterpillar {0674,1000}
Usage:
Reference: Service Magazine, May 19, 1986, Page 4, "List of Metal Surface Reconditioning Products Available From Caterpillar".
The chart lists products that have just recently been made available to dealers through the Caterpillar worldwide parts system. These products are used for cleaning and reconditioning metal surfaces without a measurable removal of metal. They will deburr edges and make a small radius.
Show/hide table
| NOTICE |
|---|
These products are abrasive and are intended for general shop applications. When in doubt on exactly how the product will perform, experiment on some scrap first.
|
Caterpillar Information System:
1987/01/26 New Torque Specification For Disconnect Switches {1411}
1987/01/26 Conversion Of Competitive Machines To Caterpillar Undercarriage Components {4150}
1987/01/19 Fuel Injector Reference For 3500 Family Engines{1290}
1987/01/19 Generator Sets Wired For Use With Customer-Supplied Switch Gear; Do Not Run Without Switch Gear{7002,7400}
1987/01/19 Oil Total Base Number (TBN) Test Kit Now Available To Dealers Outside The United States And Canada{1300}
1987/01/19 Difference Between Alternator Indicator In Electronic Monitoring System (EMS) And Low Voltage Indicator In Operating Monitoring System (OMS){7490,7450}
1987/01/05 New Water Temperature Regulators Available {1355}
1977/12/19 Maintenance Instructions For Coolant Conditioner Elements{1350}
1977/12/19 New 5P7450 Torque Multiplier For Torque Applications Up To 1500 LB FT (2030 N·m){0614}
1977/12/19 Improved Mounting Base For Air Compressor{1065}
1977/12/12 Excessive Oil Consumption Can Be Caused By Dirt In Air Inlet System Or By Flaking Of The Piston Compression Ring{1213,1215}
1977/12/12 New Coolant Tube And Regulator Housing Used With Water Cooled Exhaust Manifold Gives More Clearance For Hooks To Lift The Engine{1350,1355,1380}
1987/01/26 New Electronic Position Indicator Group Is Available {0782,0600}
1987/01/26 Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26 New Piston Oil Cooling Jet Assembly Used {1331}
1987/02/09 Tips For Job Site Repair Of Tracks{0729,4169,4170,4172}
1987/02/09 New Assembly Procedure Helps Prevent Oil Pump Failures{1304,4457}
1987/02/09 Cooling Jets Removed And Different Oil Pump Used{1000,1201,1214,1304}
1987/02/09 New Pistons Used{1214}
1987/02/09 Source For White Paint Used On Some Caterpillar Engines{7559}
1987/02/09 How To Hone Cylinder Tubes To Accept Caterpillar Oversized Cylinder Seals{7562}
1987/02/16 New Penetrating Oil/Lubricant Available (NACD Only){0645,0600}
1987/02/16 Use The Correct Vacuum Pump When Servicing Air Conditioning Systems{7320}
1987/02/16 The Importance Of The Disconnect Switch In Regard To Fire Suppression Systems With Automatic Actuation{7401}