Exhaust Elbow - Remove and Install
Start By:
- Remove the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Remove".
- Remove nuts (2).
- Remove exhaust elbow (3) from exhaust manifold (1).
- Remove gasket (5) (not shown) from the exhaust manifold.
- If necessary, remove studs (4) from exhaust elbow (3).
Show/hide table
Illustration 1 | g01379912 |
Typical example |
- Ensure that exhaust manifold (1) and exhaust elbow (3) are clean and free from damage.
- If necessary, install studs (4) to exhaust elbow (3). Tighten the studs to a torque of
18 N·m (13 lb ft) . - Position a new gasket onto exhaust manifold (1).
- Install exhaust elbow (3) onto exhaust manifold (1).
- Install nut (2) to the exhaust manifold. Tighten the nuts to a torque of
44 N·m (32 lb ft) .
Show/hide table
Illustration 2 | g01379912 |
Typical example |
End By:
- Install the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Install".
Caterpillar Information System:
C3.3 Industrial Engine Exhaust Manifold - Remove and Install
C3.3 Industrial Engine Turbocharger - Install
C3.3 Industrial Engine Fuel Injector Cover - Remove and Install
C3.3 Industrial Engine Turbocharger - Remove
C3.3 Industrial Engine Fuel Injector - Install
C3.3 Industrial Engine Fuel Injector - Remove
C3.3 Industrial Engine Fuel Injection Pump Gear - Install
C3.3 Industrial Engine Fuel Injection Pump Gear - Remove
C3.3 Industrial Engine Fuel Injection Pump - Install
C3.3 Industrial Engine Fuel Injection Pump - Remove
C3.3 Industrial Engine Front Cover - Remove and Install
C3.3 Industrial Engine Fuel Injection Lines - Remove and Install
C3.3 Industrial Engine Inlet and Exhaust Valve Springs - Remove and Install
C3.3 Industrial Engine Inlet and Exhaust Valves - Remove and Install
C3.3 Industrial Engine Inlet and Exhaust Valve Guides - Remove and Install
C3.3 Industrial Engine Engine Oil Filter Base - Remove and Install
C3.3 Industrial Engine Engine Oil Cooler - Remove
C3.3 Industrial Engine Engine Oil Cooler - Install
C3.3 Industrial Engine Engine Oil Relief Valve - Remove and Install
C3.3 Industrial Engine Engine Oil Pump - Remove and Install
C3.3 Industrial Engine Water Pump - Remove
C3.3 Industrial Engine Water Pump - Install
C3.3 Industrial Engine Water Temperature Regulator - Remove and Install
C3.3 Industrial Engine Flywheel - Remove