Fuel Injector - Remove
Start By:
- Remove the fuel injection lines. Refer to Disassembly and Assembly, "Fuel Injection Lines - Remove and Install".
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Dispose of all fluids according to local regulations and mandates. |
- Remove fuel return lines (2) from fuel injectors (1).
- Remove bolts (3).
- Remove clamps (4) from fuel injector (1).
- Remove fuel injectors (1) from the cylinder head. Remove O-ring seals (5) from fuel injectors (1).
- Remove washers (6).
Show/hide table
| |
| Illustration 1 | g01439712 |
|
Typical example | |
Caterpillar Information System:
C3.3 Industrial Engine Fuel Injection Pump Gear - Install
C3.3 Industrial Engine Fuel Injection Pump Gear - Remove
C3.3 Industrial Engine Fuel Injection Pump - Install
C3.3 Industrial Engine Fuel Injection Pump - Remove
C3.3 Industrial Engine Front Cover - Remove and Install
C3.3 Industrial Engine Fuel Injection Lines - Remove and Install
C3.3 Industrial Engine Fuel Priming Pump and Fuel Filter Base - Remove and Install
C18 Marine Engines Engine Crankcase Breather - Clean
Instructions for Determining The Secondary Voltage of the Transformer{1555, 7620} Instructions for Determining The Secondary Voltage of the Transformer{1555, 7620}
C15 On-Highway Engine Cylinder Head - Remove
3408C and 3412C Marine Engines Flywheel Housing
3408B and 3408C Industrial and Marine Engines Vibration Damper and Pulley
C3.3 Industrial Engine Fuel Injector - Install
C3.3 Industrial Engine Turbocharger - Remove
C3.3 Industrial Engine Fuel Injector Cover - Remove and Install
C3.3 Industrial Engine Turbocharger - Install
C3.3 Industrial Engine Exhaust Manifold - Remove and Install
C3.3 Industrial Engine Exhaust Elbow - Remove and Install
C3.3 Industrial Engine Inlet and Exhaust Valve Springs - Remove and Install
C3.3 Industrial Engine Inlet and Exhaust Valves - Remove and Install
C3.3 Industrial Engine Inlet and Exhaust Valve Guides - Remove and Install
C3.3 Industrial Engine Engine Oil Filter Base - Remove and Install
C3.3 Industrial Engine Engine Oil Cooler - Remove
C3.3 Industrial Engine Engine Oil Cooler - Install