Fuel Injector Cover - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Thoroughly clean all of the outer surfaces of fuel injection cover (1).
- Remove bolts (2) from fuel injection cover (1).
- Remove fuel injection cover (1).
Show/hide table
| |
| Illustration 1 | g01379464 |
|
Typical example | |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Ensure that fuel injection cover (1) is clean and free from damage.
- Install fuel injection cover (1).
- Install bolts (2). Tighten the bolts to a torque of
9 N·m (80 lb in) .
Show/hide table
|
| |
| Illustration 2 | g01379464 |
|
Typical example | |
Caterpillar Information System:
C3.3 Industrial Engine Turbocharger - Remove
C3.3 Industrial Engine Fuel Injector - Install
C3.3 Industrial Engine Fuel Injector - Remove
C3.3 Industrial Engine Fuel Injection Pump Gear - Install
C3.3 Industrial Engine Fuel Injection Pump Gear - Remove
C3.3 Industrial Engine Fuel Injection Pump - Install
C3.3 Industrial Engine Fuel Injection Pump - Remove
C3.3 Industrial Engine Front Cover - Remove and Install
C3.3 Industrial Engine Fuel Injection Lines - Remove and Install
C3.3 Industrial Engine Fuel Priming Pump and Fuel Filter Base - Remove and Install
C18 Marine Engines Engine Crankcase Breather - Clean
Instructions for Determining The Secondary Voltage of the Transformer{1555, 7620} Instructions for Determining The Secondary Voltage of the Transformer{1555, 7620}
C3.3 Industrial Engine Turbocharger - Install
C3.3 Industrial Engine Exhaust Manifold - Remove and Install
C3.3 Industrial Engine Exhaust Elbow - Remove and Install
C3.3 Industrial Engine Inlet and Exhaust Valve Springs - Remove and Install
C3.3 Industrial Engine Inlet and Exhaust Valves - Remove and Install
C3.3 Industrial Engine Inlet and Exhaust Valve Guides - Remove and Install
C3.3 Industrial Engine Engine Oil Filter Base - Remove and Install
C3.3 Industrial Engine Engine Oil Cooler - Remove
C3.3 Industrial Engine Engine Oil Cooler - Install
C3.3 Industrial Engine Engine Oil Relief Valve - Remove and Install
C3.3 Industrial Engine Engine Oil Pump - Remove and Install
C3.3 Industrial Engine Water Pump - Remove