Electronic Control Module (ECM)
Show/hide table
Illustration 1 | g01457123 |
There are two terminal boxes on the G3520B engine. (1) Terminal box for the master ECM (2) Terminal box for the slave ECM |
Show/hide table
Illustration 2 | g01089866 |
ECM in a terminal box for industrial application |
The master Electronic Control Module (ECM) controls most of the engine's functions. The module is an environmentally sealed unit that is in an engine mounted terminal box. The ECM monitors various inputs from sensors in order to activate relays, solenoids, etc at the appropriate levels. The master ECM supports the following primary functions:
- Start/stop control
- Control of ignition for the left bank
- Governing of the engine
- Air/fuel ratio control
- Monitoring of the detonation sensors on the left bank
- Monitoring of the electrical system
- Monitoring of engine operation
The slave ECM supports the following functions:
- Control of ignition for the right bank
- Monitoring of the detonation sensors on the right bank
Neither ECM has a removable personality module. The software is changed by the flash programming of a file via the Caterpillar Electronic Technician (ET).
Caterpillar Information System:
G3520B Industrial Engines Electronic Control System Operation
3408C and 3412C Marine Engines Magnetic Pickup
C15 On-Highway Engine Fuel Filter Base - Install
2007/07/09 A Guard Kit Is Available {1205}
C18 Generator Set Engines Exhaust Has Excessive Black Smoke
Emulsion Has Been Found in Certain Applications{1107, 1306, 1317, 1326} Emulsion Has Been Found in Certain Applications{1107, 1306, 1317, 1326}
C9 Marine Auxiliary and Generator Set Engines Belts - Inspect/Adjust/Replace
G3500 Engines Safety Messages
C15 On-Highway Engine Fuel Filter Base - Remove
C18 Marine Engines Indicator Lamp - Test
3500B Engines Fuel Filter Housing - Install
3500B Engines Fuel Filter Housing - Remove
C15 On-Highway Engine Fuel Control Manifold (ARD) - Remove
G3520B Industrial Engines Engine Governing
G3520B Industrial Engines Integrated Temperature Sensing Module
G3520B Industrial Engines Electronic Control System Parameters
2008/03/17 New Product Link Hardware Is Now Available {7606}
325D and 329D Excavators and 325D Material Handler Machine System Specifications Control Manifold (Pilot Oil)
C7 On-highway Engine Air Inlet Elbow
G3520B Industrial Engines Engine Sensors
G3520B Industrial Engines Ignition System
C15 On-Highway Engine Fuel Control Manifold (ARD) - Disassemble
G3520B Industrial Engines Air/Fuel Ratio Control - NO<SUB>X</SUB> Feedback
G3520B Industrial Engines Crankshaft