Fuel Control Manifold (ARD) - Disassemble
Disassembly Procedure
Start By:
- Remove the fuel control manifold. Refer to Disassembly and Assembly, "Fuel Control Manifold (ARD) - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove pressure sensors (1) and (2) .
Show/hide table
Illustration 1 | g03757356 |
- Remove O-ring seal (3) from pressure sensor (1) .
Show/hide table
Illustration 2 | g03757371 |
- Repeat Step 2 for pressure sensor (2) .
- Remove nuts (4) and (5) . Remove coil assemblies (6) and (7) .
Show/hide table
Illustration 3 | g03757398 |
- Remove valve (8) and (9) .
Show/hide table
Illustration 4 | g03757517 |
- Remove O-ring seals (10) from valve (8) .
Show/hide table
Illustration 5 | g03757576 |
- Repeat Step 6 for valve (9) .
Caterpillar Information System:
G3520B Industrial Engines Ignition System
G3520B Industrial Engines Engine Sensors
C7 On-highway Engine Air Inlet Elbow
325D and 329D Excavators and 325D Material Handler Machine System Specifications Control Manifold (Pilot Oil)
2008/03/17 New Product Link Hardware Is Now Available {7606}
G3520B Industrial Engines Electronic Control System Parameters
G3520B Industrial Engines Integrated Temperature Sensing Module
G3520B Industrial Engines Engine Governing
C15 On-Highway Engine Fuel Control Manifold (ARD) - Remove
G3520B Industrial Engines Electronic Control Module (ECM)
G3520B Industrial Engines Electronic Control System Operation
3408C and 3412C Marine Engines Magnetic Pickup
G3520B Industrial Engines Air/Fuel Ratio Control - NO<SUB>X</SUB> Feedback
G3520B Industrial Engines Crankshaft
Installation of the 129-2288 Shaft {1205, 1353, 1356, 1359} Installation of the 129-2288 Shaft {1205, 1353, 1356, 1359}
C15 On-Highway Engine Fuel Control Manifold (ARD) - Assemble
C15 On-Highway Engine Fuel Control Manifold (ARD) - Install
C3.4 Engines for Caterpillar Built Machines Balancer - Disassemble
C3.4 Engines for Caterpillar Built Machines Balancer - Assemble
C7 Marine Engine Piston and Rings
C15 On-Highway Engine Solenoid Valve (ARD) - Remove and Install
G3520B Industrial Engines System Overview
2007/07/30 An Update to the Maintenance Interval Schedule for Some Caterpillar Marine Engines {1063}
G3520B Industrial Engines Component Location