Fuel Filter Base - Remove
Removal Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 185-3630 | Strap Wrench | 1 |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Turn the fuel supply to the OFF position.
- Disconnect harness assemblies (1) .
Show/hide table
 | |
| Illustration 1 | g01374416 |
- Use Tooling (A) in order to remove fuel filter (6) from fuel filter base (5) .
- Disconnect tube assemblies (4) .
- Disconnect hose assembly (3) .
- Remove bolts (2) and remove fuel filter base (5) .
Caterpillar Information System:
C18 Marine Engines Indicator Lamp - Test
3500B Engines Fuel Filter Housing - Install
3500B Engines Fuel Filter Housing - Remove
2007/05/01 Water Pump Weepage Versus Water Pump Leakage {1361}
2007/05/14 Water Pump Weepage Versus Water Pump Leakage {1361}
C18 Marine Engines Sensor Supply - Test
2007/04/30 Change to the Maintenance Interval Schedule {1100, 1102, 1121, 1123, 1210}
CX35 On-Highway Transmission Plate Locations and Film Locations
C32 Petroleum Engines Air Shutoff - Test
3408B and 3408C Industrial and Marine Engines Auxiliary Drive Pulley
3408C and 3412C Marine Engines Auxiliary Drive Pulley
C7 On-highway Engine Air Compressor
G3500 Engines Safety Messages
C9 Marine Auxiliary and Generator Set Engines Belts - Inspect/Adjust/Replace
Emulsion Has Been Found in Certain Applications{1107, 1306, 1317, 1326} Emulsion Has Been Found in Certain Applications{1107, 1306, 1317, 1326}
C18 Generator Set Engines Exhaust Has Excessive Black Smoke
2007/07/09 A Guard Kit Is Available {1205}
C15 On-Highway Engine Fuel Filter Base - Install
3408C and 3412C Marine Engines Magnetic Pickup
G3520B Industrial Engines Electronic Control System Operation
G3520B Industrial Engines Electronic Control Module (ECM)
C15 On-Highway Engine Fuel Control Manifold (ARD) - Remove
G3520B Industrial Engines Engine Governing
G3520B Industrial Engines Integrated Temperature Sensing Module