Bucket Cylinder
Show/hide table
Illustration 1 | g03651517 |
Show/hide table
Specification for 362-5365 Bucket Cylinder Gp | |||
Item | Qty | Part | Specification description |
1 | 1 | 198-5529 Bushing | Bore diameter before assembly is |
Installation depth is |
|||
2 | 1 | 116-3513 Locknut | Before assembly, apply 8T-9579 Oil to the face and threads. |
Torque to |
|||
3 | 2 | 147-5738 Ring | Lubricate the inside diameter and the outside diameter with clean grease. |
4 | 1 | 8C-9179 Seal As | Lubricate the inside diameter and the outside diameter with clean grease. |
5 | 1 | 147-5776 Ring | Lubricate the inside diameter and the outside diameter with clean grease. |
A | 1 | 362-4928 Hydraulic Cylinder | Bore diameter is |
B | 1 | 361-3320 Rod As | Diameter is |
C | 1 | 424-2919 Head | Bore diameter over two lands is |
6 | 1 | 6E-0813 Bushing | Bore diameter before assembly is |
Installation depth is |
|||
7 | 1 | 128-9261 Bushing | Outside diameter is |
Thickness is |
|||
8 | 1 | 367-3928 Buffer Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
9 | 1 | 367-3929 U-Cup Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
10 | 1 | 165-9294 Lip Type Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
11 | - | - | Before assembly, apply green Loctite 609 to the wiper seal groove. |
Caterpillar Information System:
980L Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Transmission Planetary
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Output Transfer Gears
390F Excavator Machine System Stick - 3.4 m (11.15 ft)
390F Excavator Machine System Stick - 2.9 m (9.51 ft)
390F Excavator Machine System Stick - 4.4 m (14.44 ft)
2014/07/07 New Fan Hose Clamp Support Bracket Now Used on AD55B and AD60 Underground Articulated Trucks {5057}
Check the Gear Pump (Hoist, Steering, Brake, and Pilot) on AD30 Underground Articulated Trucks{4268, 4306, 5073, 5083, 5085} Check the Gear Pump (Hoist, Steering, Brake, and Pilot) on AD30 Underground Articulated Trucks{4268, 4306, 5073, 5083, 5085}
D6N Track-Type Tractor Ripper Tip and Shank Protector - Inspect/Replace - If Equipped
953K and 963K Track-Type Loaders Hydrostatic Transmission and Hydraulic System Filters - Replace
953K and 963K Track-Type Loaders Hydraulic Tank Breather - Replace
953K and 963K Track-Type Loaders Hydraulic System Oil Level - Check
953K and 963K Track-Type Loaders Hydraulic System Oil - Change
990K Wheel Loader Machine Systems Input Transfer Gears - Adjust
D6R2 Track-Type Tractor Fuel System - Prime
980L Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Transmission Planetary
926M, 930M and 938M Wheel Loaders Additional Messages
2014/04/18 New Hose Assembly for the Pilot Lines Group Is Now Used on Certain D6R Track-Type Tractors {5057}
990K Wheel Loader Machine Systems Output Transfer Gears - Adjust
990K Wheel Loader Machine Systems Differential Backlash and Bearings - Adjust
844K Wheel Dozer Sensor Signal (PWM) - Test
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Exhaust Gas Valve (NRS) - Remove and Install
953K and 963K Track-Type Loaders Hydrostatic Transmission and Hydraulic System Oil Sample - Obtain
2014/03/27 Improved Power Train Oil Lines are Now Available for 621H, 623H, and 627H Wheel Tractor-Scrapers {3016}
926M, 930M and 938M Wheel Loaders Battery Disconnect Switch