New Fan Hose Clamp Support Bracket Now Used on AD55B and AD60 Underground Articulated Trucks {5057}
- Underground Articulated Truck:
- AD55B (S/N: JNW1-UP)
- AD60 (S/N: KNW1-UP)
Description of Change: New fan hose clamp support bracket is now used. The new fan hose clamp support bracket prevents contact with the secondary fuel filter.
Adaptable To: The new fan hose clamp support bracket is effective in production with, and adaptable to the following machines.
Show/hide table
Model     | Effective With     | Adaptable To     |
---|---|---|
AD55B     | S/N:JNW276-UP     | S/N:JNW1-275     |
AD60     | S/N:KNW101,114-116,118,120-UP     | S/N:KNW102-113,117,119     |
Show/hide table
Qty     | New Part Number     | Part Description     | Former Part Number     |
---|---|---|---|
1     | 454-0969     | Plate As     | 416-8452     |
2     | 8T-4139     | Bolt     | -     |
2     | 5P-1076     | Hard Washer     | -     |
- Remove and discard 416-8452 Plate As (6), two bolts (4) and two washers (5).
Note: Retain clip (1), clip (2), grommet (3), bolt (7), nut (8) and two washers (9) for installation purposes.
Show/hide table
Illustration 1 | g03651407 |
View of fan pump (1) Clip (2) Clip (3) Grommet (4) Bolt (5) Washer (6) 416-8452 Plate As (7) Bolt (8) Nut (9) Washer |
- Install 454-0969 Plate As (10). Use bolt (7), nut (8) and two washers (9). Refer to Illustration 2.
Show/hide table
Illustration 2 | g03651408 |
(1) Clip (2) Clip (3) Grommet (7) Bolt (8) Nut (9) Washer (10) 454-0969 Plate As (11) 8T-4139 Bolt (12) 5P-1076 Hard Washer (13) Hose assembly (14) Hose assembly |
Caterpillar Information System:
Check the Gear Pump (Hoist, Steering, Brake, and Pilot) on AD30 Underground Articulated Trucks{4268, 4306, 5073, 5083, 5085} Check the Gear Pump (Hoist, Steering, Brake, and Pilot) on AD30 Underground Articulated Trucks{4268, 4306, 5073, 5083, 5085}
D6N Track-Type Tractor Ripper Tip and Shank Protector - Inspect/Replace - If Equipped
953K and 963K Track-Type Loaders Hydrostatic Transmission and Hydraulic System Filters - Replace
953K and 963K Track-Type Loaders Hydraulic Tank Breather - Replace
953K and 963K Track-Type Loaders Hydraulic System Oil Level - Check
953K and 963K Track-Type Loaders Hydraulic System Oil - Change
844K Wheel Dozer Relay - Test
844K Wheel Dozer Operator Control Switch (Switch to Ground) - Test
844K Wheel Dozer Sensor Supply - Test
844K Wheel Dozer Wiring Harness (Short Circuit) - Test
844K Wheel Dozer Wiring Harness (Open Circuit) - Test
953K and 963K Track-Type Loaders Fuel Tank Water and Sediment - Drain
390F Excavator Machine System Stick - 4.4 m (14.44 ft)
390F Excavator Machine System Stick - 2.9 m (9.51 ft)
390F Excavator Machine System Stick - 3.4 m (11.15 ft)
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Output Transfer Gears
980L Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Transmission Planetary
390F Excavator Machine System Bucket Cylinder
990K Wheel Loader Machine Systems Input Transfer Gears - Adjust
D6R2 Track-Type Tractor Fuel System - Prime
980L Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Transmission Planetary
926M, 930M and 938M Wheel Loaders Additional Messages
2014/04/18 New Hose Assembly for the Pilot Lines Group Is Now Used on Certain D6R Track-Type Tractors {5057}
990K Wheel Loader Machine Systems Output Transfer Gears - Adjust