Transmission Planetary
Show/hide table
Illustration 1 | g03651493 |
Pictorial view |
Show/hide table
Specification for 435-8061 Transmission Planetary Gp | |||
Item | Qty | Part | Specification Description |
1 | 12 | 387-0101 Spring | Length under test force is |
Test force is |
|||
Free length after test is |
|||
2 | 24 | 375-6965 Spring | Length under test force is |
Test force is |
|||
Free length after test is |
Show/hide table
Illustration 2 | g03651499 |
Section A-A |
Show/hide table
Item | Qty | Part | Specification Description |
3 | Thickness of four new friction discs and three new plates is |
||
4 | 233-9748 Friction Disc | Thickness of one new friction disc is |
|
3 | 370-8590 Plate | Thickness of one new plate is |
|
4 | Thickness of four new friction discs and three new plates is |
||
4 | 233-9748 Friction Disc | Thickness of one new friction disc is |
|
3 | 370-8590 Plate | Thickness of one new plate is |
|
5 | Thickness of two new friction discs and one new plate is |
||
2 | 233-9748 Friction Disc | Thickness of one new friction disc is |
|
1 | 370-8590 Plate | Thickness of one new plate is |
|
6 | 5 | 3P-2793 Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
7 | 5 | 3P-2794 Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
8 | 1 | 2D-8363 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
9 | Thickness of two new friction discs and one new plate is |
||
2 | 234-6707 Friction Disc | Thickness of one new friction disc is |
|
1 | 370-8592 Plate | Thickness of one new plate is |
|
10 | Thickness of two new friction discs and one new plate is |
||
2 | 233-9748 Friction Disc | Thickness of one new friction disc is |
|
1 | 370-8590 Plate | Thickness of one new plate is |
|
11 | 1 | 3P-2792 Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
12 | 1 | 1P-9261 Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
13 | 1 | 8M-5661 O-Ring Seal | Before assembly of each bearing, lubricate with oil immediately. |
14 | 2 | 8M-4390 O-Ring Seal | Before assembly of each bearing, lubricate with oil immediately. |
15 | 1 | 6Y-8864 Slinger Gasket | Assemble with rubber surface against the slinger. |
16 | 15 | 6J-6721 Bolt | Torque to |
B | 3 | 3P-3246 Planetary Shaft | Diameter is |
C | 3 | 9W-3898 Gear | Bore is |
D | 6 | 7G-3457 Gear | Bore is |
E | 3 | 112-7309 Planetary Shaft | Diameter is |
F | 3 | 7G-2476 Planetary Gear | Bore is |
G | 3 | 6P-6739 Planetary Shaft | Diameter is |
H | 4 | 7G-2486 Planetary Gear | Bore is |
J | 4 | 3P-3242 Planetary Shaft | Diameter is |
Caterpillar Information System:
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Output Transfer Gears
390F Excavator Machine System Stick - 3.4 m (11.15 ft)
390F Excavator Machine System Stick - 2.9 m (9.51 ft)
390F Excavator Machine System Stick - 4.4 m (14.44 ft)
2014/07/07 New Fan Hose Clamp Support Bracket Now Used on AD55B and AD60 Underground Articulated Trucks {5057}
Check the Gear Pump (Hoist, Steering, Brake, and Pilot) on AD30 Underground Articulated Trucks{4268, 4306, 5073, 5083, 5085} Check the Gear Pump (Hoist, Steering, Brake, and Pilot) on AD30 Underground Articulated Trucks{4268, 4306, 5073, 5083, 5085}
D6N Track-Type Tractor Ripper Tip and Shank Protector - Inspect/Replace - If Equipped
953K and 963K Track-Type Loaders Hydrostatic Transmission and Hydraulic System Filters - Replace
953K and 963K Track-Type Loaders Hydraulic Tank Breather - Replace
953K and 963K Track-Type Loaders Hydraulic System Oil Level - Check
953K and 963K Track-Type Loaders Hydraulic System Oil - Change
844K Wheel Dozer Relay - Test
390F Excavator Machine System Bucket Cylinder
990K Wheel Loader Machine Systems Input Transfer Gears - Adjust
D6R2 Track-Type Tractor Fuel System - Prime
980L Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Transmission Planetary
926M, 930M and 938M Wheel Loaders Additional Messages
2014/04/18 New Hose Assembly for the Pilot Lines Group Is Now Used on Certain D6R Track-Type Tractors {5057}
990K Wheel Loader Machine Systems Output Transfer Gears - Adjust
990K Wheel Loader Machine Systems Differential Backlash and Bearings - Adjust
844K Wheel Dozer Sensor Signal (PWM) - Test
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Exhaust Gas Valve (NRS) - Remove and Install
953K and 963K Track-Type Loaders Hydrostatic Transmission and Hydraulic System Oil Sample - Obtain
2014/03/27 Improved Power Train Oil Lines are Now Available for 621H, 623H, and 627H Wheel Tractor-Scrapers {3016}