980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Caterpillar

Output Transfer Gears

Usage:

982M F9A

Show/hide table




Illustration 1	g03651442

Show/hide table

Table 1
Specification for 372-3271 Transfer Gears and Case Gp
Item	Qty	Part	Specification Description
1	1	8T-4200 Bolt	Apply blue Loctite 242 to the threads.
2	1	6Y-6328 Shim Pack	As required, use the following shim pack (contains 13 shims) in order to obtain bearing adjustment.
			Total thickness of one shim pack is 1.85 mm (0.073 inch).
			Thickness of each shim in the shim pack for six shims is 0.25 mm (0.010 inch).
			Thickness of each shim in the shim pack for five shims is 0.05 mm (0.002 inch).
3	7	6V-8336 Bolt	Torque to 120 ± 20 N·m (89 ± 15 lb ft).
4	8	6V-5684 Bolt	Torque to 120 ± 20 N·m (89 ± 15 lb ft).
5	10	6V-3668 Bolt	Torque to 120 ± 20 N·m (89 ± 15 lb ft).
6	2	2K-4472 O-Ring Seal	Lubricate the bore lightly with the lubricant that is being sealed.
7	1	8T-4136 Bolt	Torque to 30 ± 7 N·m (266 ± 62 lb in).
8	9	6V-3823 Bolt	Torque to 120 ± 20 N·m (89 ± 15 lb ft).
9	6	6V-5842 Bolt	Torque to 70 ± 15 N·m (52 ± 11 lb ft).
10	1	6Y-6329 Shim Pack	As required, use the following shim pack (contains 13 shims) in order to obtain bearing adjustment.
			Total thickness of one shim pack is 1.85 mm (0.073 inch).
			Thickness of each shim in the shim pack for six shims is 0.25 mm (0.010 inch).
			Thickness of each shim in the shim pack for five shims is 0.05 mm (0.002 inch).
11	1	7L-2181 O-Ring Seal	Lubricate the bore lightly with the lubricant that is being sealed.
12	2	133-4292 Lip Type Seal	Lubricate the sealing lip lightly with the lubricant that is being sealed.
12	2	133-4292 Lip Type Seal	Install lip seal flush with the face of the bearing cage.
13	2	0L-1328 Bolt	Before assembly, apply red Loctite 271 to the threads. Torque to 475 ± 60 N·m (350 ± 44 lb ft).
14	3	7X-3344 Bolt	Torque to 120 ± 20 N·m (89 ± 15 lb ft).
15	7	6V-7673 Bolt	Torque to 120 ± 20 N·m (89 ± 15 lb ft).
16	2	1P-7834 Bearing Cup	Minimum end play of bearing is 0.020 mm (0.0008 inch).
17	8	136-4189 Bolt	Torque to 120 ± 20 N·m (89 ± 15 lb ft).
18	1	5J-1086 O-Ring Seal	Lubricate the bore lightly with the lubricant that is being sealed.
19	1	9J-7031 Drain Plug	Torque to 68 ± 7 N·m (50 ± 5 lb ft).
20	1	7B-3039 Spring	Length under test force is 26.195 mm (1.0313 inch). Test for ce is 16.81 to 14.32 N (3.78 to 3.22 lb). Free length after test is 36.513 mm (1.4375 inch).

Show/hide table




Illustration 2	g03651444
Section B-B

Show/hide table

Table 2
Item	Qty	Part	Specification Description
21	-	-	Surface must be free of oil and grease
			Before assembly, apply 6V-5765 Sealant to the matting surface.

Show/hide table




Illustration 3	g03651443
Rear view

Show/hide table

Table 3
Item	Qty	Part	Specification Description
23	18	8T-0281 Bolt	Torque to 300 ± 40 N·m (221 ± 30 lb ft).
24	2	8T-0282 Bolt	Torque to 300 ± 40 N·m (221 ± 30 lb ft).
25	2	6V-3303 Bolt	Torque to 300 ± 40 N·m (221 ± 30 lb ft).
26	6	6V-5696 Bolt	Torque to 120 ± 20 N·m (89 ± 15 lb ft).
27	8	6V-1820 Bolt	Torque to 70 ± 15 N·m (52 ± 11 lb ft).
28	1	6V-1720 Serial Number Plate	Apply 154-8874 Adhesive Kit to the surface.