390F Excavator Machine System Caterpillar

Stick - 3.4 m (11.15 ft)

Usage:

390F FEH

Show/hide table




Illustration 1	g03651417
Typical example

Show/hide table

Table 1
Specification for 451-6213 Hoe Stick Gp , 451-6221 Hoe Stick Gp, and 501-7402 Hoe Stick Gp
Item	Qty	Part	Specification Description
All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the bushings , the bucket, and the cylinder pin bores. After you assemble the bushings, coat all the bores and the bushings with 5P-0960 Grease Cartridge.
1	-	-	The stick cylinder must be assembled to orient the grease zerk, as shown.
2	1	367-1461 Pin As	Diameter is 129.85 ± 0.04 mm (5.112 ± 0.002 inch).
3	As required, use the following shims to adjust a maximum lateral clearance to 1.0 mm (0.04 inch):
	1	151-0653 Shim	Thickness is 0.5 mm (0.02 inch).
	2	093-0076 Shim	Thickness is 1.0 mm (0.04 inch).
	1	093-0108 Shim	Thickness is 2.0 mm (0.08 inch).
4	1	367-1455 Pin As	Diameter is 129.85 ± 0.04 mm (5.112 ± 0.002 inch).
5	4	234-3748 Bushing⁽¹⁾	Bore before assembly is 140.38 ± 0.04 mm (5.527 ± 0.002 inch).
			Outside diameter is 164.29 ± 0.013 mm (6.468 ± 0.001 inch).
			Installation depth is 9.5 ± 0.8 mm (0.37 ± 0.03 inch).
6	2	-	Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
7	4	9X-4601 Lip Type Seal	Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
8	As required, use the following shims to adjust a maximum lateral clearance to 1.0 mm (0.04 inch):
	1	151-0653 Shim	Thickness is 0.5 mm (0.02 inch).
	2	093-0076 Shim	Thickness is 1.0 mm (0.04 inch).
	1	093-0108 Shim	Thickness is 2.0 mm (0.08 inch).
9	2	4I-4542 Bushing⁽¹⁾	Bore before assembly is 110.30 ± 0.02 mm (4.343 ± 0.001 inch).
9	2	4I-4542 Bushing⁽¹⁾	Installation depth is 9.5 ± 0.8 mm (0.37 ± 0.03 inch).