Piston Pump (Implement) - Remove and Install - 45 CC
Start By:
- Remove the cab.
Show/hide table
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin. |
Show/hide table
Personal injury can result from hot oil spray and raised work tools. Make sure all the work tools have been lowered, the oil is cool and the pressure has been released from the hydraulic system before removing any components or lines. Do not allow hot oil or components to contact skin. |
- Drain the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the correct draining and filling procedures.
Show/hide table
Illustration 1 g03608657 Show/hide tableIllustration 2 g03649197 - Disconnect hose assemblies (1) and (3). Disconnect harness assembly (2).
Show/hide table
Illustration 3 g03610640 - Attach a suitable lifting device to implement pump (5). The weight of implement pump (5) is approximately
14 kg (30 lb) . Remove bolts (4). Remove implement pump (5).
- Install implement pump (5) in the reverse order of removal.
Caterpillar Information System:
966M Tier 4 Series XE and 972M Tier 4 Series XE Wheel Loader Power Train Transmission Oil Pump - Remove and Install
Cat® Terrain for Track-Type Tractor with Blade Control System Components
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Limit Switch (Stop Light) - Adjust
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Steering Frame Lock - Separate and Connect
994K Wheel Loader Plate Locations and Film Locations
D6T Track-Type Tractor Engine Supplement Turbocharger - Remove and Install
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Boom Hydraulic System - Health Check
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Parking Brake
D6T Track-Type Tractor Monitoring System Service Tools
D6T Track-Type Tractor Monitoring System General Information
D7E Track-Type Tractor ARD Spark Plug - Clean
D6T Track-Type Tractor Engine Supplement Secondary Fuel Filter and Base - Remove and Install
2014/04/29 Improved Elevator Rollers are Now Available for Certain Wheel Tractor-Scrapers {6260}
621K, 623K and 627K Wheel Tractor-Scrapers Engine Supplement Air Control Valve (ARD Combustion) - Remove and Install - Scraper
C27 and C32 Engines for Caterpillar Built Machines Housing (Rear) - Remove and Install
D6T Track-Type Tractor Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install
986H Wheel Loader Engine Supplement Steering Frame Lock - Separate and Connect
D6T Track-Type Tractor Engine Supplement Engine Front Support - Remove and Install
D6T Track-Type Tractor Engine Supplement Crankshaft Front Seal and Wear Sleeve - Remove and Install
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Hydraulic Tank Oil - Retain
AD45B Underground Articulated Truck Cab Air Filter - Clean/Replace - If Equipped
C3.4B Engines Glow Plug Starting Aid - Test
994K Wheel Loader Fuel System Water Separator - Check/Drain
525D, 535D, 545D, 555D Wheel Skidder Power Receptacle